Parts Identification; Before Use; Assembly And Set-Up - Panasonic RD-3600 Operating Instructions Manual

Thank
you for
selecting the
RD-3600,
FREQUENCY GENERATOR SERVO TURNTABLE.
To help you obtain the maximum performance from this unit, we recommend that you read these instructions
carefully.
Headshell/Cartridge
Acoustic insulator (leg) x
4
Turntable platter
Anti-skating knob
Tubular arm
Turntable shaft
Cueing lever
Arm clamp
Arm rest
Speed selector
Turntable base
(Simulated wood)
Arm base
Locking nut
PARTS IDENTIFICATION
Hinge x
2
Screw x
4
Turntable mat
45 r.p.m. adaptor
Balance weight
Stylus pressure ring
Output terminals
Phono cables
Simulated wood base
Fig. 1
BEFORE USE ASSEMBLY AND SET-UP
©CHECK TO MAKE SURE YOUR
PER THE LIST BELOW.
Turntable unit .1
Dust cover.1
Turntable platter.1
Turntable mat .1
©REMOVE THE TRANSIT
MATERIAL
TURNTABLE IS PACKAGED AS
Parts box.1
I
Headshell with cartridge..1
Balance weight .1
^ 45 r.p.m. adaptor .1
, SPACERS AND PACKING
We recommend that you keep these items for future use, when
the unit must again be transported. (See Fig. 2.)
NOTE:
DO NOT CONNECT THE AC POWER PLUG UNTIL THE ASSEMBLY
HAS BEEN COMPLETED!
©PLACE THE TURNTABLE MAT ON THE PLATTER
NOTE:
In rare cases the automatic mechanism may have engaged the
tonearm gear, or moved out of its normal position during trans¬
portation. In such a case we recommend that you move the tone-
arm toward the center of the platter (turntable shaft), rotate the
turntable platter manually about 10 times to engage the return
mechanism, and let the arm return to its rest position.
©INSTALLATION OF THE HEADSHELL AND BALANCE WEIGHT
Remove the stylus cover. (See Fig. 3.)
Insert the headshell in the end of the tubular arm, and tighten
it by turning the locking nut. (See Fig. 4)
Fig. 3
Fig. 4
Headshell
Plug
"WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE."