Registering Xm Satellite Radio Channels - Yamaha RX-V1065 Owner's Manual

Registering XM Satellite Radio
channels
You can use this feature to store up to 40 XM Satellite
Radio channels. You can then recall any preset channel
easily by selecting the preset channel as described in
"Calling a preset channel (Preset Search mode)" on this
page.
Registering preset channels
1
Search a channel you want to set as a preset
channel in one of the XM Satellite Radio
search modes.
For details, see "XM Satellite Radio operations"
(page 34).
XM
008 80's
2
Press EMEMORY (or eMEMORY).
The indicator on the front panel display changes as
follows.
Currently registered channel number
(or "---" if empty)
XM
P01:--- << 008
Preset number to which new
channel number is registered
y
• By holding down EMEMORY (or eMEMORY) for more than
2 seconds, you can skip the following steps and automatically
register the selected channel to an empty preset number (next to the
lastly-registered preset number).
• To cancel the preset operation, press jRETURN.
3
Press FPRESET l / h (or ePRESET k / n)
to select the stored preset station number.
y
• You can also select a preset number using the lNumeric
keys.
• If you select a preset number being used (currently registered
channel number appears next to the preset number), the current
preset channel will be overwritten.
4
Press EMEMORY (or eMEMORY).
Channel number to be
registered
XM ® Satellite Radio tuning (U.S.A. model only)
Calling a preset channel (Preset Search
mode)
Prior to selecting a preset channel in the Preset Search
mode, you must preset XM channels. For details, see
"Registering preset channels" on this page.
Preset channel number
XM
008 80's
Press FPRESET l / h (or ePRESET k / n)
repeatedly to change the preset channel number
(1 to 40).
y
• You can directly select a preset number by pressing a lNumeric
keys while calling a preset channel.
Clearing preset channels
You can clear the assignments of preset XM Satellite
Radio channels.
1
Press rOPTION on the remote control.
The Option menu for "XM" is displayed.
2
Press jCursor k / n repeatedly to select
"Clear Preset" and then press jENTER.
3
Press jCursor k / n to select the preset
station number that you want to clear.
XM
008 80's
4
Press jENTER to execute the clearing of
the selected preset channel.
To clear the registration of multiple preset numbers,
repeat steps 3 and 4. To end the operation, press
rOPTION.
35
En