Download Print this page

Sealey AK2932 Manual page 2

Heavy-duty butane soldering torch

Advertisement

3. OPERATION
3.1.
TO FILL. (Refer to fig.1)
3.1.1.
Use standard butane fuel. Fill in a well ventilated area away from open flame. Turn the torch off, make sure the flame is out, allow to cool
down for five minutes before filling.
3.1.2.
Hold torch upside down and insert the filling can's nozzle into the gas filling valve. Press nozzle into the valve and release gas. Once gas
begins to seep out around the edge of the nozzle, the gas tank is full. Remove the filling can.
3.2.
TO USE. (Refer to fig.1)
3.2.1.
Centre the gas adjustment dial between the (+) and (-) signs.
3.2.2.
Using your thumb, pull down the safety switch.
3.2.3.
To light the torch hold it in your hand, use thumb to press and hold down the ignition button, (it may take two or three times before the
torch ignites). Each attempt will require pulling down the safety switch, then pressing the ignition button again.
3.2.4.
To adjust the flame intensity, use the gas adjustment dial.
3.2.5.
For a continuous flame, before releasing the ignition button, move the continuous flame button to the right.
3.2.6.
To turn the torch off, move continuous flame button to left.
.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Fig.1
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
AK2932 Issue 2 14/04/23
REGISTER YOUR
PURCHASE HERE

Advertisement

loading