Using The Subwoofer (Yst-Sw105); Controls And Their Functions - Yamaha NS-P620 Owner's Manual

USING THE SUBWOOFER (YST-SW105)

Controls and their functions

~
Power indicator
Lights up in green while the subwoofer is turned on.
Ÿ
STANDBY/ON button
Press this button to turn on the power. (The power
indicator lights up in green.)
Press again to set the subwoofer in the standby mode.
(The power indicator does not light.)
* This button can be used only when the POWER (
switch is set in the ON position.
Standby mode
The subwoofer is still using a small amount of power
in this mode.
!
B.A.S.S. (Bass Action Selector System) button
When this button is pressed in to the MUSIC position,
the bass sound in audio software is well reproduced.
By pressing the button again so that it pops out at the
MOVIE position, the bass sound in video software is
well reproduced.
MOVIE
10
E-
MUSIC
Front panel
Rear panel
⁄
HIGH CUT control
Adjusts the high frequency cut off point.
Frequencies higher than the frequency selected by this
control are all cut off (and no output).
* One graduation of this control represents 10 Hz.
›
)
@
VOLUME control
Adjusts the volume level. Turn the control clockwise to
increase the volume, and counterclockwise to
decrease the volume.
¤
OUTPUT (TO SPEAKERS) terminals
Can be used for connecting to the main speakers.
Signals from the INPUT1 terminals (
these terminals.
(Refer to "CONNECTIONS" for details.)
$
) are sent to