Advertisement
Step.3
Remove the Rear Cover and pull out display key connectors.
Step.4 Remove 4 screw then pull out LVDS FFC 51P & LVDS FFC 41P & panel
power connector.
Step.5 Unscrew 2 screws and then pull out the main-board from shielding.
Step 6. Unscrew 11 screws and separate MID FRAME and LCM.
By Screw driver
By Screw driver
By Screw driver
7
Screw: M3x4 / T3x6
Force: Force:4-5 kgf.cm
Screw: M3x5
Force: 5-7 kgf.cm
Screw: M3x4
Force:4-5 kgf.cm
Advertisement
