Connecting an External Power Supply
To apply external power to the MX7 follow the steps below in sequence.
1. Plug the 3 prong AC adapter cable end of the external power assembly into an AC power source (e.g., wall outlet).
2. Firmly press the female end of the power cable into the male connector on the power adapter. When AC power is being
supplied to the power adapter, the LED on the power adapter illuminates green.
3. Squeeze the catches of the I/O connector and push the cable connector into the MX7 I/O port until it clicks. The click
means the connector is seated firmly.
4. Press the power cable connector pin from the power adapter into the connector on the (USB/Power or Serial/Power)
cable attached to the base of the MX7. External power is now being supplied to the MX7.
Whenever possible, use the AC power adapter with the MX7 to conserve the main battery power and maintain a charge in the
internal battery.
1. Connects to multi-purpose cables connected to I/O
port on MX7
2. AC receptacle
3. Wall plug
4. AC connection from wall to adapter
3-3