Haier I-MASTER 5 Series User Manual page 7

4. Using your Kettle
HEATING WATER
1. Remove the kettle from the base [1] and
remove the lid. [2]
2. Fill the kettle with the desired amount of
fresh water reading the water gauge inside
of kettle body. [3] Always fill between
the min 250ml and max 1.7L level (1
Cup=250ml).
NOTE: Featuring with One-Cup-Safe
technology, your kettle is reassured that
heating up a minimum amount of 250ml
water is safe.
3. Refit the lid to the kettle body ensuring it is
locked in place. [4]
4. Place the kettle onto the base. [5,6]
5. Press the ON/OFF button on the kettle
base. [7]
The temperature indicator panel will
illuminate from 20ºC through 100ºC
on the Base control panel, it will then
remain illuminated on 20ºC when ready
to be set.
6. Select the desired temperature on the
control panel by pressing the -/+ buttons.
The selected temperature indicator
will illuminate with and you will hear 2
audible beeps, the heating process will
automatically start.
40ºC - Baby Drink
70ºC, 80ºC, 85ºC & 90ºC - Specialty Tea
95ºC - Coffee
100ºC - Boil water
WARNING: Please do not fill the kettle
with milk or prepare baby milk in the
kettle.
NOTE: The individual temperature
indicators will flash then remain
illuminated as the temperature rises
during the heat cycle until the desired
temperature is reached.
IMPORTANT: The desired temperature can
be changed at any time during the heating
process.
If the water is hotter than the new desired
temperature, then it must be allowed to
cool down to the lower temperature before
being used.
The individual temperature indicators will
flash then go off as as the temperature
[8]
reduces in the cooling cycle to the desired
temperature.
7. When the water has reached the selected
temperature, you will hear 3 audible
beeps. [9]
After 15 seconds, the temperature
indicator lights will turn off automatically
and your appliance will go into standby
mode.
8. Carefully remove the kettle from the base
and pour your water. [10]
9. Return the kettle to the base.
NOTE: If the appliance remains connected
to the power source, the previously used
temperature setting will be saved for next use.
KEEP WARM FUNCTION
Your product is fitted with a keep warm
function, this will maintain the water at the
desired temperature for up to 30 minutes after
the heating cycle is complete.
• The keep warm function can be turned
on during heating or within 15 seconds
immediately after.
• Press the keep warm button, the indicator
will illuminate and the function is
activated. [11]
• To turn off this function, press the keep
warm button again, the indicator light will
turn off and the function is deactivated. [11]
IMPORTANT: The appliance will go into standby
mode automatically after keep warm 30 minutes.
STANDBY MODE
After the heating cycle or keep warm cycle,
without any operation for 15 seconds, the kettle
will turn to standby mode automatically, only
the ON/OFF indicator will be illuminated.
The kettle will automatically power off after 10
minutes of further inactivity.
MUTE FUNCTION
Your product is fitted with a mute function,
this will turn off all acoustic sounds from the
appliance.
• The mute function can be turned on by
pressing and holding the keep warm button
for 3 seconds.
• To turn off this function, press and hold the
keep warm button again for 3 seconds and
the function is deactivated.
7
GB