Loading The Disc/Disc Play - Yamaha CDC-735 Owner's Manual

1
1
2
3
4
Notes
After closing the disc tray by pressing the OPEN/CLOSE
button in the stop mode or after selecting any disc by using
the DISC SKIP button, the display shows the total number of
tracks and the total recorded time of the disc to be played for
a few seconds.
6

LOADING THE DISC/DISC PLAY

Label side
upward
Disc tray
2,4
6 6
5
Select the disc play mode (DISC MODE: SINGLE or
ALL) while watching the display.
"SINGLE" mode: The unit will play a designated disc only.
"ALL" mode: The unit will play all discs in the tray in
sequence.
6
* If necessary, select a desired disc by using a DISC-select
button or the DISC SKIP button.
Additionally, you can close the disc tray by pressing the
PLAY/PAUSE button, a DISC-select button, a numeric
button or the RANDOM button, or by pressing the front edge
of the disc tray gently. If the tray is closed in these ways,
play will begin automatically, however, the display will not
show the total number of tracks and the total recorded time
of the first disc to be played.
PLAYXCHANGE
During play, you can open the disc tray by pressing the
PLAYXCHANGE button without interrupting disc play.
However, in this case, pressing the DISC SKIP button has no
effect.
3,6
5
Shows the selected disc
mode.