Advertisement
Adjustment of the stylus descent point
Adjust as follows, using a 30 cm LP.
1. Remove the cap.
2. Perform the auto-in operation to check the descent point of the stylus.
4. Repeat steps 2 and 3 to have the stylus descend to the position in the Figure.
Stylus descent
adjusting screw
( Here the cap ee)
been removed.
30 cm record
Beginning of
sound grooves
Adjust the adjusting screw so that the
tip of stylus lowers at about 1/3 of the
clearance from the record edge to the
initial sound groove.
OPERATIONS
M@ For automatic play (auto-in, auto-return)
Set the SIZE selector (ac-
@ (ON) (cx). The power is
supplied
to the
turntable
SOWEd
and
the POWER
indicator
ae
® lights up.
Depress the SPEED ((133,
D1 45) select switch
@ to
the correct
record
revolu-
tion speed (33 or 45).
Remove the rest hook.
switch @, then the platter
6 'Ly
@®
starts
rotating,
the
Advertisement
