Yamaha A4000 Owner's Manual page 10

AD INPUT unit
6 AD INPUT ON/OFF
Turns the AD INPUT function on or off.
7 SOURCE
Sets the input source of the AD INPUT.
8 PAN
Sets the pan position of the input signal via the AD INPUT function. If the source is set to
2Mono, separate settings for INPUT L and INPUT R are available.
9 LEVEL
Sets the levels for OUTPUT 1 and OUTPUT 2, respectively. If the source is set to 2Mono,
separate settings for INPUT L and INPUT R are available.
) OUTPUT
Selects the output destination of the input signal via the AD INPUT function. Two
independent stereo outputs are available for OUTPUT 1 and 2. If the source is set to
2Mono, separate settings are available for INPUT L and INPUT R for both OUTPUT 1 and
2, for a total of four independent stereo outputs.
EFFECT1-3 unit
! CONNECTION
Sets the connections for EFFECT 1, 2 and 3.
@ LEVEL
Sets the input levels for EFFECT 1, 2 and 3.
# DETAIL
Opens the EFFECT 1, 2 and 3 dialog for editing in detail.
$ EFFECT TYPE
Shows the effect types assigned to EFFECT 1, 2 and 3. Click the boxes to see the effect
type list and assign other effects.
% PAN
Sets the output pan positions for EFFECT 1, 2 and 3.
^ WIDTH
Sets the output pan widths for EFFECT 1, 2 and 3.
& LEVEL
Sets the output levels for EFFECT 1, 2 and 3.
* OUTPUT
Selects the output destination for EFFECT 1, 2 and 3. This function is not available for an
effect block which is connected to another effect block.
EFFECT4-6 unit
The same functions are provided for EFFECT 4, 5 and 6 as for EFFECT 1, 2 and 3 above. This
unit is not available for the A4000.
10