Recording An Image From A Tape As A Still Image - Sony Digital8 DCR-TRV520 Operating Instructions Manual

Recording an image from a tape as a still image
Recording a still image from other equipment
(1) Set the POWER
switch to VTR and set DISPLAY to LCD in the menu settings.
(2) Play back the recorded tape, or turn the TV on to see the desired program.
The image from TV or VCR appears on the LCD or in the viewfinder.
(3) Follow the steps 3 and 4 on page 85.
Using the AN connecting cable
VCR
OUT
S VIDEO
VIDEO
AUDIO/VIDEO
t
: Signal flow
Connect the yellow plug of the A/V connecting cable to the video jack on the VCR or
the TV.
If your TV or VCR has an $ video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures.
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (not supplied) to the S video jacks of both your cameorder and
the TV or VCR.
Using the i.LINK cable (the DV connecting cable)
DV $ VIDEO ULANC
DV OUT
86
(not supplied)
: Signal flow
DV IN/OUT