Drum Setup Controls - Yamaha MU100 Owner's Manual

Multi Edit Mode

Drum Setup Controls

The Drum Setup controls allow you to make a wide variety of settings
for the drum sounds in a Drum Part. These settings include Pitch con-
trols, Level, Pan, effect send, filter controls and EG (Envelope Genera-
tor), among others. Moreover, these parameters can be set to completely
independent values for each of the drum sounds in a Part.
The Drum Setup controls can only be called up by first selecting a Part to
which a Drum Part is assigned. (For basic information on using the Drum
setup controls, see page 55.)
Parh: [EDIT] button

Drum Setup Controls -------------------

114
"DRUM"
Pitch Parameters ................................................ 115
Pitch Coarse
Pitch Fine
Velocity Pitch Sensitivity (VelPchSens)
Level ..................................................................... 115
Level
Pan ........................................................................ 115
Pan
Effect Send Parameters .................................... 115
Reverb Send (Rev Send)
Chorus Send (Cho Send)
Variation Send (Var Send)
Filter Parameters ................................................ 116
LPF Cutoff Frequency (LPF Cutoff)
LPF Resonance (LPF Reso)
Velocity LPF Cutoff Sensitivity (VelLPFSens)
HPF Cutoff Frequency (HPF Cutoff)
EQ Parameters .................................................... 117
EQ Low Frequency (Low Freq)
EQ Low Gain
EQ High Frequency (High Freq)
EQ High Gain
EG Parameters .................................................... 117
EG Attack
EG Decay 1
EG Decay 2
Multi Mode