Equalizer (Eq) Edit; Eq Frequency Parameters - Yamaha MU100R Owner's Manual

Equalizer (EQ) Edit

The Equalizer (EQ) Edit parameters allow you to adjust the overall
tone of the MU100R sound in five separate frequency bands. EQ pre-
sets are also provided for instantly calling up tone settings specially
suited for different types of music.
0 dB
Frequency
To enter the Equalizer Edit mode, press the EQ button.
EQ Type
Settings: Flat, Jazz, Pops, Rock, Con-
cert
EQ Type provides five different preset EQ
settings, specially programmed for spe-
cific types of music. The Flat setting is a
"flat" EQ preset with no change in equal-
ization. Jazz, Pops, Rock and Concert
each have different EQ settings and fre-
quency bands, specially suited for those
types of music.

EQ Frequency Parameters

Thru: 80 Hz, 500 Hz, 1.0 kHz, 4.0
kHz, 8.0 kHz
Jazz: 50 Hz, 125 Hz, 900 Hz, 3.2
kHz, 6.3 kHz
Pops: 125 Hz, 315 Hz, 1.0 kHz, 2.0
kHz, 5.0 kHz
Rock: 125 Hz, 200 Hz, 1.2 kHz, 2.2
kHz, 6.3 kHz
Low Lo Mid
Equalizer (EQ) Edit
Mid Hi Mid High
Concert: 80 Hz, 315 Hz, 1.0 kHz, 6.3
kHz, 8.0 kHz
Range: –12 — +12 dB
The remaining EQ parameters let you set
the level of each of the five frequency
ranges: low, low-mid, mid, high-mid and
high. The bars in the display show the EQ
settings as a frequency "curve," with
peaks indicating level boosts in the fre-
quency range and valleys indicating level
cuts. A setting of 00 dB corresponds to
no level change.
NOTE
Changing the EQ Type automatically restores
the default Frequency Parameter settings and
cancels any Frequency Parameter settings you
have made.
155