Table of Contents
Advertisement
For the cooking instructions refer to "Hints
and tips" chapter, Moist Fan Baking. For
general energy saving recommendations
refer to "Energy Efficiency" chapter, Energy
saving tips.
6.5 How to set: Heating Functions
1. Turn on the oven with
The display shows the set temperature, the
symbol and the number of the heating
function.
2. Press
or
3. Press
or the oven starts automatically
after 5 seconds.
If you turn on the oven and do not set any
heating function or programme, the oven
turns off automatically after 20 seconds.
6.6 How to set: Temperature
Press
or
to change the temperature in
steps: 5 °C.
When the oven is at the set temperature a
signal sounds and the Heat up indicator
disappears.
6.7 How to check: Temperature
You can check the current temperature in the
oven when the function or programme works.
7. CLOCK FUNCTIONS
7.1 Clock functions table
To show or change the time of day. You
can change the time of day only when the
Time of
appliance is on.
Day
To set how long the appliance works.
Duration
To set when the appliance turns off.
End Time
To combine Duration and End Time func‐
tion.
Time De‐
lay
To turn on the appliance with necessary
settings with only one press of the sensor
Set + Go
field any time later.
.
to set a heating function.
1. Press
.
The display shows the temperature in the
oven.
2. Press
or the display shows again the
set temperature automatically after 5
seconds.
6.8 How to set: Fast Heat Up
Do not put food in the oven when the Fast
heat up works.
The Fast Heat Up is available only for some
heating functions. If Faulty Tone is turned on
in the settings menu, the signal sounds if the
Fast Heat Up is not available for the set
function. Refer to "Additional functions"
chapter, Using the settings menu.
The Fast Heat Up decreases the heat up
time.
To turn on the Fast Heat Up press and hold
for more than 3 seconds.
If the Fast Heat Up is turned on the display
shows flashing bars.
To set a countdown time. This function
has no effect on the operation of the ap‐
Minute
pliance. You can set the Minute Minder at
Minder
any time and also when the appliance is
off.
00:00
To set the count up, which shows how
Count Up
long the appliance works. It is on immedi‐
Timer
ately when the appliance starts to heat.
The Count Up Timer is not turned on if
Duration and End Time are set. This
function has no effect on the operation of
the appliance.
7.2 How to set: Time of Day
After the first connection to the mains, wait
until the display shows
flashes.
and 12:00. "12"
ENGLISH
11
Advertisement
Table of Contents
