Honeywell RTH8580ZW User Manual page 22

System setup
What other functions can I change? (See page 16 for instructions.)
Function
0670
Keypad Lock
0680
Heat temperature
control
0690
Cool temperature
control
0700
Temperature
display offset
0710
Restore Original
Settings
RF10
Z-Wave Network
Connection
RF20
Z-Wave Node
Connection
33-00131ES—01
Settings & Options
0 Keypad unlocked (fully functional)
1 Partially locked (access to temperature settings only)
2 Fully locked
2 Standard temperature control (recommended)
1 Choose if room is warmer than set temperature
3 Choose if room does not reach set temperature
2 Standard temperature control (recommended)
1 Choose if room is cooler than set temperature
3 Choose if room does not reach set temperature
0 Thermostat displays actual room temperature
[Other options: -3, -2, -1, 1, 2, 3°F offset (-1.5°C to 1.5°C)]
0 No reset
1 Reset installer options, the Z-Wave Radio module, & programming
schedule to factory default (only date and time settings are retained).
0 Remove
1 Add
0 Idle
1 Send node
20