Table of Contents
Advertisement
/
LENS COVER
Open/close
Ring
EJECT Switch
PoWer
SWitch
Recording
Start/Slop
Button
V
Tally lamp
(lights while recording is in progress)
NOTE:
Ybu should
already
have performed
the procedures
listed
below.
If not, do so before continuing.
• Power (_
pg. 8)
• Recording
Mode
Setting
(_
pg.
J2)
• Tape Length Setting
(_
pg. J2)
• Super VHS-ET function
(_
pg. J4)
• Recording
Format
Setting
(_
pg. J4)
• Grip Adjustment
(_
pg. J 6)
• Viewfinder
Adjustment
(_
pg. J 6)
I
OAD A CASSETTE
First open the LCD monitor
to an angle
of over 60
degrees.
Slide EJECT to open the cassette
holder,
then insert
the cassette with
the [abe[ facing
out. Press PUSH to
ensure the holder
is closed
and locked.
Shooting WhileWatching TheViewfinder
ENTER RECORD-STANDBY MODE
Make sure the LCD monitor
is closed
and locked.
Turn the lENS
COVER
Open/Close
Ring to open the
lens cover, then set the Power
Switch
to "CAMERA"
("AUTO"
or "PRO.").
.The power lamp lights and the camcorder enters the
Record-Standby mode.
_The scene you are aimed at appears on the
viewfinder screen, with the word "PAUSE"
superimposed upon it.
STARTSHOOTING
Press the Recording
Start/Stop
Button.
.,, _REc ,, appears
in the viewfinder
while
recording
is
in progress.
Power Switch Position
According
to the Power Switch
position
you have selected,
the following
functions
are available:
AUTO
PRO.
OFF:
(Full Auto
mode):
(PRO.
mode):
Allows you to record using
NO special effects or manual
adjustments. Suitable for
standard recording.
Allows you to set various
recording functions using the
menus. If you want more creative
capabilities than full auto
recording, try this mode.
Allows you to switch off the
camcorder.
Advertisement
Table of Contents
