Table of Contents
Advertisement
1
То ensure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
|
2
Install your unit in a cool, dry, clean place — away
from windows, heat sources, and too much vibration,
dust, moisture or cold. Avoid sources of hum
(transformers, motors). To prevent fire or electrical
shock, do not expose to rain and water.
3
Do not operate the unit upside-down. It may overheat,
possibly causing damage.
4
Never open the cabinet. If a foreign object drops into
the set, contact your dealer.
5
Do not place records or other objects on top of the
unit; this will block the ventilation holes, cause the
internal temperature to rise and may result in a failure.
6
ро not use force on switches, knobs or cords. When
moving the set, first turn the unit off. Then gently
disconnect the power plug and the cords connecting
to other equipment. Never pull the cord itself.
7
Do not attempt to clean the unit with chemical
solvents; this might damage the finish. Use a clean,
dry cloth.
8
Be sure to read the "Troubleshooting" section on
common
operating errors before concluding that your
unit is faulty.
WARNING
DANGER
Invisible laser radiation when open and interlock failed or
defeated.
Avoid direct exposure to beam.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
|
As the laser beam used т this compact disc player is
harmful to the eyes, do not attempt to disassemble the
cabinet. Refer servicing to qualified personel only.
To avoid electrical shock, do not open the unit. Refer
servicing to qualified personnel only.
DANGER:
The use of optical instrument with this product
will increase eye hazard.
eee ЕВО
BEFORE OPERATING YOUR UNIT.
FCC INFORMATION
(U.S.A.)
1. IMPORTANT
NOTICE
: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual,
meets FCC
requirements. Modifications not expressly approved
by Yamaha may void your authority, granted by the
FCC, to use the product.
. IMPORTANT
: When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the
USA.
. NOTE
: This product has been tested and found to
comply with the requirements listed in FCC
Regulations, Part 15 for Class "B" digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential. environment will not result
in harmful interference with other electronic devices.
This equipment generates/uses radio frequencies
and, if not installed and used according to the
instructions found in the users manual, may cause
interference harmful to the operation of other
electronic devices.
Compliance with FCC regulations does not
guarantee that interference will not occur in all
installations. If this product is found to be the
source of interference, which can be determined by
. turning the unit "OFF" and "ON", please try to
eliminate the problem
by using one of the following
measures:
Relocate either this product or the device that is
being affected by the interference.
Utilize power outlets that are on different branch
(circuit breaker or fuse) circuits or install AC line
filter/s.
In the case of radio or TV interference,
relocate/reorient the antenna.
If the antenna
lead-in
is 300 ohm
ribbon lead, change the lead-in to co-
axial type cable.
If these corrective measures
do not produce
satisfactory results, please contact the local retailer
authorized to distribute this type of product. If you
can not locate the appropriate
retailer, please contact
Yamaha Electronics Corp., U.S.A. 6722 Orangethorpe
Ave, Buena Park, CA 90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
Advertisement
Table of Contents
