Specifications - Kenwood KA-996 Instruction Manual

Specifications
Caution: Read this page carefully
to ensure safe operation.
A UDIO section
GENERAL
Rated power output
STEREO MODE (FTC)__
100 watts per channel minimum RMS, both
j
channels driven, at 8 U from 20 Hz to 20 kHz with
no more than 0.09% total harmonic distortion.
SURROUND MODE
Front_
j 100 watts per channel minimum RMS, both i
| channels driven, at 8 LI 1 kHz with no more than j
j
0.9% total harmonic distortion.
Power consumption
For the U.S.A. and Canada.2.3 A
For other countries.210W
AC outlets
For the U.S.A. and Canada
SWITCHED .2 (Total 400W, 3.3A max.)
For other countries
SWITCHED.2 (Total 300W max.)
Dimensions.W: 440 mm (17-5/16")
H: 143 mm {5-5/8")
D: 300 mm (11-13/16")
Weight (Net) .9.3 kg (20.5 lb)
Rear_
20 watts per channel minimum RMS, both channels
driven, at 8 121 kHz with no more than 0.9% total
. harmonic distortion.
Total harmonic distortion
.0.06% (20 Hz - 20 kHz, 50 W, 8 12)
.0.03% (1kHz, 50 W, 8 1>)
Frequency response
LINE (CD, TAPE, VIDEO)
PHONO "RIAA" response
Maximum input level
PHONO (MM).
Signal to noise ratio
(IHF'66)
PHONO (MM) .
LINE (CD, TAPE, VIDEO)
.20 Hz - 60 kHz, +0 dB, -3 dB
.20 Hz - 20 kHz, r 0.5 dB
120 mV, 0.5% T.H.D. at 1 kHz
.75 dB
.95 dB
Input sensitivity/impedance
PHONO (MM).3.5 mV/47 k 12
LINE (CD, TAPE, VIDEO).200 mV/47 kLI
ADAPTOR IN.200 mV/47 kil
Tone control
BASS.± 10 dB (at 100 Hz)
TREBLE.:: 10 dB (at 10 kHz)
Loudness control (volume at -30 dB level)
Output level/impedance
TAPE REC.
ADAPTOR OUT.
4
- 8 dB <100 Hz)
...200 mV/1 kLI
...200 mV/1 kLI
VIDEO section
Input level/impedance
VIDEO (composite) .1 Vp-p/75 LI
Input (VIDEO 1, VIDEO 2)
Output level/impedance
VIDEO (composite) .1 Vp-p/75 U
Ouput (VIDEO 1, MONITOR OUT)
Note:
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed
without notice.
14 k£ 396 *Lf ;