Operation Without The Remote Control Unit.13 - Sanyo KHS0921 Instruction Manual

CAUTION
If the outdoor temperature is extremely low, it is recommended
to use another heating appliance;
When the outdoor temperature falls to around 10° F, the compressor stops.
In this case, to prevent room from freezing, use another heating appliance.
Night Setback Mode
in Heating
What does the Night
Setback mode mean?
STEP 1: Press the NIGHT SETBACK button in cooling.
The C * J) mark appears at the lower left of the display.
Press the NIGHT SETBACK button again to release the night setback
function. This button has no effect in the FAN mode.
Setting
temperature
/ H
4'F
^_
^ 4"F
'/TTN
_
•
30 min. 30 mim_
Time
In this mode, the air conditioner will heat the room to the set temperature,
and then the thermostat will make the unit pause. After about 30 minutes,
the air conditioner will automatically lower the set temperature by 4° F.
When the room temperature reaches the newly set value, the thermostat will
cause the unit to pause. After about 30 minutes the temperature will again
lowered by 4° F. This enables you to save energy without sacrificing
comfort. This function is convenient when gentle heating is needed.
INDOOR UNIT
Operation selector Flap
Operation without the Remote
Control Unit
If you have lost the remote control unit or it has trouble, follow the steps
below.
1. When the air conditioner is stopped.
If you want to turn on the air conditioner, switch the operation selector to
the OFF position, and then to the ON position.
NOTE
The set temp, and fan speed are automatically set at
the latest selection before stopping.
2. When the air conditioner is running.
If you want to turn off the air conditioner, switch the operation selector to
the OFF position.
07
-
346-13
13