Installation Of The Soundcard - Yamaha WF192 Online Manual

Yamaha wf192 sound cards: user guide

Hide thumbs Also See for WF192:

Getting started (8 pages)

Table of Contents

User support service is available if your user registration is completed.

Registered users can receive the following services:

• Driver software update

• Useful information

• Technical support

For details on the technical support service, see Yamaha's WAVEFORCE web site

(http://www.waveforce.com).

Installation of the card must be done in the following procedure:

Notice that installation of the card requires an empty PCI card slot in your computer. If you use a PCI slot that has been occupied

with another card, first remove the driver software for that card, turn off the computer to remove the card, and then reboot the

computer to forcibly recognize that the old card is not there. After completion of this process, turn off the computer and start the

following installation process for the new card.

1 Referring to the manual that came with your computer, as explained in "Consulting on Documentation" of

the paper document (Getting Started) in the package, prepare for installation of the card inside your

computer.

2 Open the antistatic bag and take out the card while holding it by its edge to avoid touching metal PCI

connectors and electronic components on the card.

3 Locate a sticker put on the card that is printed with a card's serial number. Make a note of the number

for online registration, as explained in "User Registration" above.

4 Make sure the location of internal connectors on the card that attach with appropriate connectors from the

internal devices of the computer (audio lines from CD-ROM drive, Modem card, video card). Each

location of the card's connector is as follows:

External connectors

Line In

Mono Microphone In

Line Out

Speaker Out

Game Port & MIDI

User Support Service