Motorola C1001CB+ Quick Start Manual page 5

1. Plug the power adaptor into the socket marked
charger and plug the other end into the wall socket.
2. Remove the battery cover from the back of the handset and insert the
2 x AAA NiMH rechargeable batteries supplied. Please note the '+' and
'-' markings inside the battery compartment and insert in the correct
direction.
3. Slide the battery cover back into place.
4. If you are charging the batteries for the first time, place the handset on the
charger to charge for at least 16 hours continuously.
5. When the handset is fully charged, the
display. The display will show
that it is registered to the base.
Important
Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA
Ni-MH 300mAh rechargeable batteries) supplied with your C1CB+.
Getting started
icon will appear steadily on the
HANDSET
and the handset number to indicate
on the rear of the
5