Lenovo 20V9003DIX Hardware Maintenance Manual page 86

Remove the LCD module and the EDP cable
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD unit" on page 71
"Remove the hinge cover" on page 73
"Remove the LCD bezel" on page 78
Step 1. Remove the two pieces of removable tape with tweezers and then remove the LCD module.
Figure 94. Remove the two pieces of removable tape with tweezers and then remove the LCD module
Step 2. Peel off the tape and then disconnect the EDP cable from the LCD module.
Figure 95. Peel off the tape and then disconnect the EDP cable from the LCD module
Go to
https://support.lenovo.com/partslookup
replacement parts:
EDP cable
LCD module
Removable tape
Remove the microphone rubbers
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD unit" on page 71
"Remove the hinge cover" on page 73
"Remove the LCD bezel" on page 78
80
Hardware Maintenance Manual
to look up the Lenovo part numbers of the following