Yamaha RX-V750 Owner's Manual page 76

P_e],V:J,Jl#l_:_:l,vV:leT:7:Y,VpJr:l#_l;Y:YlrJi_fe]p]_e],Vl_
Press an input selector button to select the
input source you want to listen to in the
second room.
Tile disphty window shows "2: name of selected
inpnt" if the remote control is in the Zone 2 mode.
DVRN_
©
You can control Zone 2 using the input
selector, STANDBY, SYSTEM POWER, MUTE
and VOL -/+ buttons.
':' If "ZONE2 AMP" in OPTION MENU is set to ON, you
can use VOL _+ to a;liust sound output from speakers
commcted to the PRESENCE/ZONE 2 speaker terminals
(see page 61). However. VOL _+ cmmot be used to
atljust sound output h'om the ZONE2 OUTPUT jacks.
Press SELECT A/V to exit from the Zone 2
mode.
• "ZONE2" will @pear in the display window only when A is
pressed, and SYSTM only when V is pressed.
• If you press SELECT A when the unit is set to Zone 2 mode. the
unit switches to Zone 3 ]node. However. this unit does not
support Zone 3 mode. To exit Zone 3 mode, press SELECT V.
• Turning this unit to either on or standby
SYSTEM POWER and STANDBY work differently
depending on the selected mode that appears on the
display window.
• When normal, Zone2 mode is selected, you can tnrn
the main unit, Zone 2 to on/standby individually.
• When system mode is selected, or when YPC is
selected as the amplifier library (L:AMP) code, you
can turn the main unit, Zone 2 to on/standby all
together simnltaneonsly.
LeD display SYSTEM POWER/
STANDBY
Normal mode* Name of component Turns the main unit
on/standby
Zone 2 mode "ZONE2" or "2:name Turns Zone 2 to on/
of component" standby
System mode "SYSTM" Turns everything (the
main unit and Zone
2) on/standby
"MAIN" appears %r a llew seconds when SYSTEM POWER
or STANDBY is pressed.
• Special considerations for DTS software
The DTS signal is a digital bitstream. If you attempt to
send the DTS signal to the second room yon will only hear
digital noise (that may damage your speakers). Thus, the
t%llowingconsiderations and adjustments need to he made
when playing DTS-encoded discs.
For DVDs encoded in DTS
Only 2 channel analog audio signals may be sent to the
second
roonl,
Use the disc menu to set the DVD player's mixed 2-
channel left and right audio outputs to the PCM or Dolby
Digital sonndtrack.
For CDs encoded in DTS
To avoid unexpected noise, DO NOT USE the Zone 2
feature with CDs encoded in DTS.
72