Frigidaire FHWW144TE1 Use & Care Manual page 18

18
OPERATING INSTRUCTIONS
PUREAIR FILTER(sold separately):
TM
This unit has available space for use of
PureAir Filters(sold separately). There are
TM
di erent types of PureAir
sold separately. You can purchase PureAir
Filters by scanning QR code behind the air inlet
grille or by visiting Frigidaire.com or by calling
the Frigidaire Customer Service Center
1-800-944-9044(US) / 1-800-265-8352
(Canada).
PUREAIR FILTER INDICATOR:
TM
Note: If the PureAir
TM
PureAir Filter indicator will glow white.
TM
RESET PUREAIR
TM
DO THIS:
HOLD SLEEP BUTTON
3 SECONDS
After 1440 hours of operation the PureAir
Filter indicator will turn red. To reset, replace
with new PureAir Filter, then hold the "Sleep"
TM
button 3 for seconds.
DIMMING DISPLAY:
After 60 seconds of control inactivity the display and indicator lights will turn o . Press any
button on the control panel or remote control and the display will resume. Please note that
if the unit is in Eco mode and the set temperature has been reached the unit may appear o .
However, the unit is on and will continue to sample the air every 10 minutes. To confirm,
press any button on the control panel or remote control to illuminate the display to show
unit in Eco mode.
Filters, which are
TM
White light
filter is installed the
FILTER LIGHT:
Red light
SLEEP FEATURE:
TM
YOU WILL SEE:
Note: The display will show SL for 3 secs. The
display and indicator lights will turn down
25%.
In this mode, the unit will select Auto fan speed
automatically, and the selected temperature will
increase by 2 °F 30 minutes after the mode is
selected. The temperature will then increase by
another 2 °F after an additional 30 minutes. This
new temperature will be maintained for 7 hours
before it returns to the originally selected
temperature. This ends the "Sleep" mode and
the unit will continue to operate as originally
programmed. The "Sleep" mode program can
be cancelled at any time during operation by
pressing the "Sleep" again, "Fan speed" or
TM
"Mode" button.
DO THIS:
PRESS SLEEP
BUTTON