Haier HPRB08XCM User Manual page 7

English
As
1. Main window panel and extension panels
- extends from 20" up to 46" 3 pieces
2. Exhaust nozzle. .1 piece
.8 pieces
1 piece
4. Exhaust hose
5. Cover. 1 piece
6. Foam.. .2 pieces
7. Hose connector Л piece
1)Connect the 3 pieces of the window panels by sliding the 2 extension panels
into the main window panel.
2) Apply a foam strip to the end of each extension panel.
3)Open the window and place the window panel assembly into the window.
Adjust the extension panels to fit the width or height of the window as shown
below (see figure A). Secure the extension panels using 4 blunt tip screws
(see figure B-1). Secure the main window panel using 4 pointed screws (see
figure B-2 and B-3).
A)Expand the 2 ends of the exhaust hose. Connect the hose connector to one
end of the exhaust hose by turning clockwise. Then insert the exhaust nozzle
at the other end of the exhaust hose by turning clockwise (see figure C) to
create the hose assembly.
5)Insert the hose connector end of the hose assembly into the rear of the unit
and turn clockwise to secure (see figure D).
6)Insert the exhaust hose with nozzle end into the window panel(see figure Е).
7)Plug the power cord into the wall outlet and press the "Reset" button.
8)Please allow 8" of space around the unit for proper air circulation.
9)When removing the portable air conditioner for storage, the window panel
may be left in place. Simply place the cover over the nozzle hole (see figure
A).