Outline; Outline Of "Sample Program - Brother PT-P900 Reference Manual

2. Outline

2.1.

Outline of "Sample program"

The sample program in this manual uses the MELSEC iQ-F series programmable controller and prints out the
bar code with Brother label printer.
In this sample program, the label template information has been set to the label printer in advance, this is
precondition before use. In this way, the procedure for filling different information for each label from the
programmable controller is provided.
[Example]
PC
(Initial setting, recovery, etc.)
1) The programmable controller CPU starts program and requests printing to the label printer at the
same time.
2) The label printer prints out the label according to the settings (for example: numbering and date
setting).
* Initial settings of the template information, bar code information, and any numbering are performed
with connection to PC beforehand.
Network (Ethernet)
or serial (RS-232C)
Print label
6
MELSEC iQ-F Brother Label Printer Sample Program Reference Manual
communication
Mitsubishi programmable controller
MELSEC iQ-F
(With an expansion adapter or
expansion board)
Label printer