Table of Contents
Advertisement
SYSTEM MENU
AUTO ID/IP RESET
RESET ITEM
ID/IP RESET START
DETECTED MONITORS
COMMAND TRANSFER
LANGUAGE
OSD
OSD TIME
OSD POSITION
OSD SIZE
INFORMATION OSD
COMMUNICATION INFO.
OSD TRANSPARENCY
OSD ROTATION
LANDSCAPE
PORTRAIT
KEY GUIDE
Resets all of the monitor IDs and/or IP addresses in a LAN chain. Highlight START and press SET on the
remote control to show the [AUTO ID/IP RESET] menu.
Select which item to reset for all monitors in the LAN chain.
Highlight YES and press SET to reset the selected [RESET ITEM].
[MONITOR ID] will change all of the monitor IDs to 1 (default setting).
[IP ADDRESS] will change all of the monitor IP addresses back to their previous setting.
[ID and IP] will reset both the monitor IDs and IP addresses.
Shows the number of detected monitors.
When [ON] is selected, commands sent to the master monitor are transferred to the other monitors in the
LAN chain.
Select the language used by the OSD.
Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds.
Determines the location where the OSD appears on the screen.
Change the size of the OSD on the screen.
Selects whether or not to automatically show information about the monitor when it powers on, changes
input, or the current input signal changes.
The information includes the current input, audio source, aspect ratio, resolution, and refresh rate.
The monitor's ID and IP address are also shown unless their setting is OFF.
Note that the information OSD is also displayed when pressing the DISPLAY button on the remote control.
The remote control function cannot be turned off.
Selects whether or not to show the [MONITOR ID] and [IP ADDRESS] when the [INFORMATION OSD] is
[ON] or when pressing the DISPLAY button on the remote control.
The information is selected in [EXTERNAL CONTROL] or [NETWORK INFORMATION] in [NETWORK].
Makes the OSD partially transparent.
Changes the OSD orientation between landscape and portrait.
Shows the OSD in landscape orientation.
Shows the OSD in portrait orientation.
Shows the monitor's button controls Key Guide when open the OSD Menu.
The Key Guide is aligned to the monitor's button control panel and does not move if the OSD POSITION
changes. It is a visual guide to indicate the position of the buttons so that features can be easily adjusted
when not using a remote control.
NOTE:
This function is not available when [OSD FLIP] is [ON].
English−106
Advertisement
Table of Contents
