Table of Contents
Advertisement
LKRA-PCAB1 Projector Auto Calibration Box
For details on how to use the LKRA-PCAB1, see "Calibrating the Screen" (page 35).
Rear
a Indicator B
Indicates the system status of the LKRA-PCAB1.
b Indicator A
Indicates that the hardware is initializing.
c Calibration camera
Measures the convergence of the two projectors.
d Tripod hole
e LCD panel
For details on the display screen, see "LCD Panel
Displays" (page 37).
f Touch sensor
Operate the LKRA-PCAB1 application by touching
the "buttons" that correspond with the functions that
appear in the function area of the LCD panel. Only the
LEDs that correspond to a currently controllable
function will light.
Touching the sensor with a pen or your fingernails
may result in erroneous operation. Be sure to touch
the sensor firmly with your fingertips.
Front
F 1
F 2
Touch sensor/LEDs
g Projector status LED
Indicates the connection status between the LKRA-
PCAB1 and the projectors.
h GND connector
Connects to safety grounding.
i CTRL1 connector
Use the supplied connection cable to connect this to
the RS-232C connector on the sub projector.
j COM connector
This is currently not used. (Intended for future
expansion.)
k Power status LED
Indicates the power status.
12
LCD panel
F 3
Function area
Various command
functions appear
for F1 to F3.
Advertisement
Table of Contents
