Related Manuals for Philips CE162/10
Summary of Contents for Philips CE162/10
- Page 1 Always there to help you Register your product and get support at www.philips.com/support CE162 Question? Contact Philips User manual...
-
Page 3: Table Of Contents
Contents 1 Safety 8 Listen to an external player 2 Your car audio system 9 Adjust sound Introduction What's in the box 10 Enjoy features with AppsControl Overview of the system application 3 Install the car audio system Check the Bluetooth connection status 19 Connect wires Use the AppsControl application Mount into the dashboard... -
Page 4: Safety
1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. in hazardous radiation of EMC or other unsafe operation. The device is designed for negative ground (earth) 12 V DC operation only. -
Page 5: Your Car Audio System
Sampling frequencies: 44.1 kHz, 48 kHz Bitrates: 64-192 kbps and variable bitrates ID3 tag V2.0 or later Congratulations on your purchase, and support that Philips offers, register your product at www.philips.com/welcome. .m4p, .mp4, and .aac) Introduction What's in the box... -
Page 6: Overview Of The System
Overview of the system Press and hold to reject an incoming call. Tune to a radio station. Press to skip to the previous/next track. Unlock the front panel. Press and hold to rewind a track or search fast forward. For .wma and .mp3 tracks on a storage device, press to select the previous Press to answer or redial a call. - Page 7 Press and hold to access the system For .wma and .mp3 tracks, press menu. repeatedly to select a repeat mode. Press to select a tuner band. Press and hold to switch music In radio mode, press to select the listening zone. preset radio station of No.
-
Page 8: Install The Car Audio System
3 Install the car Connect wires audio system Note Make sure that all loose leads are insulated with electrical tape. Consult a professional to connect wires as instructed Caution below. Use the controls only as stated in this user manual. Check the car's wiring carefully and Always follow the instructions in this chapter in connect them to the the ISO male... -
Page 9: Mount Into The Dashboard
ISO male Connect to connectors The pin arrangement for the ISO connectors depends Yellow strip To the +12V car on the type of your vehicle. To avoid damage to the battery which is unit, connect properly. energized at all times Mount into the dashboard illustrated, if applicable. -
Page 10: Attach The Front Panel
Install the sleeve into the dashboard and Attach the trim plate. Reconnect the negative terminal of the car battery. Slide the unit into the sleeve until you hear a "click". Attach the front panel Insert the notch on the front panel to the chassis on the main unit. -
Page 11: Get Started
Press to turn on the system. Press to release the front panel. » [PHILIPS] is displayed and then [SELECT OPERATING REGION] Pull the front panel outwards to remove it. (select a radio region) scrolls. When one of the following options is... -
Page 12: Set The Clock
Set the clock Select a listening zone Press and hold to access the system Press and hold until one of the following menu. options is displayed. [ALL]: For all passengers Press repeatedly until [CLK] is [FRONT-L]: For the front-left seat only displayed with time digits blinking. -
Page 13: Listen To Radio
5 Listen to radio Search for a radio station Search for a radio station automatically Select a tuner region Press to search for the previous or next radio station with strong signals. You can select a radio region that matches your location. -
Page 14: Play With Rds
Press to access the list of program Store radio stations manually types. Rotate to select a program type, and Press repeatedly to select a tuner then press band. Tune to the radio station that you want to Item Program Description store. - Page 15 [TA OFF] Use alternate frequencies not cut in. If the signal of an RDS station is poor, enable the AF (Alternate Frequency) function to search for another station that broadcasts the same program. to switch the system to the previous mode. Press and hold to access the system menu.
-
Page 16: Play From A Storage Device
6 Play from a Switch the source to [USB] or [SD/ SDHC]. storage device If the play does not start, press Control play are copied onto a compatible storage device. Button Function Press repeatedly to select a folder. Note Pause or resume play. WOOX Innovations does not guarantee compatibility Press to play the previous or next with all storage devices. -
Page 17: Switch Tracks
7 Use Bluetooth Switch tracks devices During play, you can switch tracks or folders quickly. Switch tracks directly With this car audio system, you can listen to audio from a player or make a call through Bluetooth. Press to access the track list. »... -
Page 18: Play Audio From A Bluetooth Device
Disconnect a device Play audio from a Bluetooth device Press and hold to access the system menu. If the connected Bluetooth device supports Press / repeatedly until [DISCONNECT] is displayed. you can listen to tracks that are stored on the device through the system. -
Page 19: Listen To An External Player
8 Listen to an Redial the last called number external player Press . » [REDIAL] is displayed. Press » [CALLING] is displayed. You can use the system to amplify the audio input from an external player, for example, MP3 player. Pick up an incoming call When the system receives an incoming call, the phone number or [PHONE IN] is displayed. -
Page 20: Adjust Sound
9 Adjust sound 10 Enjoy features with AppsControl The following operations are applicable to all supported media. application Button Function Rotate to increase or decrease the volume level. Press to mute the speakers or release To fully enjoy features of this product, download them from mute status. -
Page 21: Check The Bluetooth Connection Status
Launch the AppsControl application. » The home screen is displayed. The two-way control is successfully connected. You can control the AppsControl app both by your smart phone and by car audio system. To switch the interface for more features, swipe on the screen. Tap an icon to access its features or change Check the Bluetooth settings. -
Page 22: Additional Information
11 Additional (setting): Change settings. : Return to the main interface information : Add a shortcut of an application onto the current interface. Tap display the dialog box, tap Application on the dialog box to display all applications that are installed on your phone, and then tap an application name to create a shortcut. -
Page 23: Charge Your Usb Device
Charge your USB device Replace the fuse You can charge your USB device, for example, If there is no power, check the fuse and replace smart phone, with this product. it if it is damaged. Check the electric connection. Note Remove the damaged fuse from the rear panel. -
Page 24: Product Information
If the problem remains Power supply 12 V DC (11 V - 16 V), unsolved, go to the Philips Web page (www. negative ground philips.com/support). When you contact the Fuse 15 A... -
Page 25: About The Bluetooth Device
Portable Document Format (PDF) version of the user manual at www. The Bluetooth function of the device is philips.com/support. not enabled. Refer to the user manual of function. The system is not in the pairing mode. -
Page 26: Trademark Notice
Correct disposal of your old product helps to reserved. prevent potential negative consequences for the environment and human health. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. Environmental information and are used by WOOX Innovations Limited All unnecessary packaging has been omitted. - Page 28 Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V.