Setup Requirements - Asus ROG Rapture GT-BE98 User Manual

1.5 Setup Requirements

To set up your wireless network, you need a computer that meets
the following system requirements:
• Ethernet RJ-45 (LAN) port (10Base-T/100Base-
TX/1000BaseTX)
• IEEE 802.11a/b/g/n/ac/ax/be wireless capability
• An installed TCP/IP service
• Web browser such as Internet Explorer, Firefox, Safari, or
Google Chrome
NOTES:
• If your computer does not have built-in wireless capabilities, you
may install an IEEE 802.11a/b/g/n/ac/ax/be WLAN adapter to your
computer to connect to the network.
• With its quad bands technology, your wireless router supports
2.4GHz, 5GHz and 6GHz wireless signals simultaneously. This
allows you to do Internet-related activities such as Internet surfing
or reading/writing e-mail messages using the 2.4GHz band while
simultaneously streaming high-definition audio/video files such
as movies or music using the 5GHz and 6GHz bands.
• Some IEEE 802.11n devices that you want to connect to your
network may or may not support 5GHz and 6GHz bands. Refer to
the device's manual for specifications.
• The Ethernet RJ-45 cables that will be used to connect the
network devices should not exceed 100 meters.
IMPORTANT!
• Some wireless adapters might have connectivity issues to
802.11be WiFi APs.
• If you're experiencing such issue, please ensure you update the
driver to the latest version. Check your manufacturer's official
support site where software drivers, updates, and other related
information can be obtained.
• Realtek: https://www.realtek.com/en/downloads
• Mediatek: https://www.mediatek.com/products/connectivity-
and-networking/broadband-wifi
• Intel: https://downloadcenter.intel.com/
11