Table of Contents
Advertisement
18.1 Clean wastewater pump
Large remnants of food or foreign
bodies can block the waste water
pump. As soon as the rinsing water
no longer drains properly, the waste
water pump must be cleaned.
WARNING
Risk of injury!
Sharp and pointed objects or frag-
ments of glass may block the waste
water pump and cause injury.
Remove any foreign bodies care-
▶
fully.
Disconnect the appliance from the
1.
power supply.
Remove the basket.
2.
Remove the filter system.
3.
Scoop out any water.
4.
Use a sponge if necessary.
Loosen the screws on the pump
5.
cover (Torx T 20).
Transportation, storage and disposal en
Pull up and remove the pump
6.
cover.
Remove any remnants of food and
7.
foreign bodies in the interior.
Insert the pump cover, press down
8.
and screw firmly in place.
Install the filter system.
9.
Insert the basket.
10.
Transportation, storage and disposal
19 Transportation, stor-
age and disposal
Transportation, storage and disposal
19.1 Removing the appliance
Disconnect the appliance from the
1.
mains power supply.
Turn off the water tap.
2.
Detach the drainage connection.
3.
Detach the drinking water connec-
4.
tion.
Pull the appliance out carefully,
5.
along with the hose behind it.
19.2 Protect appliance from
frost
If there is a risk of frost where the ap-
pliance will be standing, e.g. in a holi-
day home, empty the appliance com-
pletely.
Empty the appliance.
▶
→ "Transporting the appliance",
Page 50
49
Advertisement
Table of Contents
