Table of Contents
Advertisement
OBJ_BUCH-1386-001.book Page 9 Monday, November 29, 2010 4:04 PM
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Spindle lock button
2 On/Off switch
3 Allen key
4 Auxiliary handle (insulated gripping surface)*
5 Grinder spindle
6 Locking screw for protection guard
7 Protection guard for grinding
8 Mounting flange
9 Grinding disc*
10 Clamping nut
11 Carbide grinding head*
12 Protection guard for cutting*
13 Cutting disc*
14 Hand guard*
15 Rubber sanding plate*
16 Sanding sheet*
17 Round nut*
18 Cup brush*
19 Cutting guide with dust extraction protec-
tion guard *
20 Diamond cutting disc*
21 Handle (insulated gripping surface)
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools
Technical Data
Angle Grinder
Article number
Rated power input
Rated speed
Grinding disc diameter,
max.
Thread of grinder spin-
dle
Thread length (max.) of
grinder spindle
Weight according to
EPTA-Procedure
01/2003
Net weight*
Protection class
* measured without protection guard and auxiliary han-
dle
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Assembly
Mounting the Protective Devices
Before any work on the machine itself, pull
the mains plug.
Note: After breakage of the grinding disc during
operation or damage to the holding fixtures on
the protection guard/power tool, the machine
must promptly be sent to an after-sales service
agent for maintenance (for addresses, see sec-
tion „After-sales Service and Customer Assist-
ance".
1 619 P09 397 | (29.11.10)
English | 9
TWS 6000
Professional
3 601 C75 4..
W
620
-1
min
11000
mm
100
M 10
mm
17
kg
1.6
kg
1.5
/II
Advertisement
Table of Contents
