Preparing the Remote Commander
To use the Remote
Commander, vou must insert two size AA (R6) batteries. Use the supplied size AA
(86) batteries.
(1) Remove the battery cover from the Remote Commander.
(2) Insert both of the size AA (R6) batteries with correct polarity.
(3) Put the batterv cover back onto the Remote Commander.
To avoid damage from possible battery leakage
Remove the batteries when you will not use the Remote Commander for a long time.
Using the Remote Commander
Make sure that the COMMANDER mode is not set to OFF in the menu system.
a
E]
3
e
ES
<
3
a
et
>
©
v
D E
Lod
u^
67