Download Print this page

How To Discharge The E.capacitor On The Frame Unit - Panasonic Lumix DMC-LZ40P Service Manual

Advertisement

1.4.

How to Discharge the E.Capacitor on the Frame Unit

CAUTION:
1. Make sure to discharge the E.capacitor on the Frame Unit.
2. Be careful of the high voltage circuit on the Frame Unit when servicing.
[Discharging Procedure]
1. Refer to the disassemble procedure and remove the necessary parts/unit.
2. Install the insulation tube onto the lead part of resistor (ERG5SJ102:1k /5W).
(an equivalent type of resistor may be used.)
3. Place a resistor between both terminals of E.capacitor on the Frame Unit for approx. 5 seconds.
4. After discharging, confirm that the E.capacitor voltage is lower than 10V using a voltmeter.
4

Advertisement

loading

This manual is also suitable for:

Lumix dmc-lz40pcLumix dmc-lz40puLumix dmc-lz40prLumix dmc-lz40egLumix dmc-lz40epLumix dmc-lz40ef ... Show all