JVC RA-E313B-DAB Instruction Manual page 7

FM OPERATION
NOTE: Extend the telescopic antenna to its full length to get the best reception, or place the unit in an
open location.
Auto Scan
• To activate Full Scan, press and hold the BACK/SCAN button.
• Once a full scan is complete, all found stations are stored in presets. To explore stations
stored in presets, press the PRESET 2+ button.
NOTE: The search may not stop at a station with a very weak signal.
• Press and hold the TU+/TU- button to search for the next/previous station.
Manual Scan
• To search for stations manually, press the TU+/TU- buttons repeatedly until your desired
frequency is reached.
NOTE: Each press will increase/decrease the frequency by 0,05 MHz. If reception is poor, adjust the
position of the aerial or try moving the radio to another location.
FM Display (Info.)
To view further information about the station you are listening to press the MENU/INFO button,
the display will show the following information:
- Radio Text
- Program Type
- Name of the Station
- Audio Type
- Time / Date
Scan Setting
This is a scan setting to search all stations, or just search stations with a strong signal.
• Press and hold the MENU/INFO button to enter the menu, and then select <Scan Setting>.
• Turn the VOLUME/SELECT knob or press the TU+/TU- buttons to select <Strong Stations
Only> or <All Stations>, then press the knob to confirm.
Audio settings
This unit will automatically switch between stereo and mono mode, but you can override this
and toggle this function manually. This can be helpful when receiving poor signal reception.
• Press and hold the MENU/INFO button to enter the menu, and then select <Audio Setting>.
• Turn the VOLUME/SELECT knob or press the TU+/TU- buttons to select <Stereo Allowed>
or <Forced Mono>, then press the knob to confirm.
BLUETOOTH
• In Bluetooth mode, <Not Connected> will flash on the display. This means the unit is not
paired with any Bluetooth device.
• Activate Bluetooth of mobile phone and search for device name RA-E313B-DAB then
connect it. If the pairing is successful, <Connected> appears on the display.
Playback
• Adjust the volume to your desired level.
• Press the VOLUME/SELECT knob to play/pause the playback.
• Press the TU+/TU- button to skip to the next/previous track.
NOTE: The operational range between the unit and the device is approximately 8 meters.If the signal
strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode automatically. For
better signal reception, remove any obstacles between the unit and the Bluetooth device. Compatibility with
all devices and media types is not guaranteed.Some mobile phones with Bluetooth functions may connect
and disconnect as you make and end calls. This is not an indication of a problem with the unit.
EN