Auxiliary Functions - Sharp ES-NFL214CWDA-EN User Manual

(*) Model Dependant

5.7 Auxiliary Functions

Before starting the program,
you can select auxiliary functions if you
wish so.
• Press the key of the auxiliary function you
want to select.
• If the symbol of the auxiliary function is
continuously on in the electronic display, the
selected auxiliary function will be enabled.
• If the symbol of the auxiliary function
is flashing in the electronic display, the
selected auxiliary function will not be
enabled.
Reason for not enabling the function:
• That auxiliary function might not be
available for the selected washing
program.
• The machine might have passed the
step where that auxiliary function could
be applied.
• The auxiliary function might be
incompatible with another auxiliary
function you have previously selected.
1. Delayed start auxiliary function
You can use this auxiliary function to delay
the start time of the washing cycle for 1 to
23 hours.
To use the delay function:
• Press the delay key once.
• "1h" will be displayed.
the electronic display.
•
•
•
you can select other functions without
touching the "Start/Pause" key, and then
you can touch the "Start/Pause" key to
enable time delay.
To cancel the delay function:
•
•
2. Selecting the level of soiling
You can wash your laundries in shorter
or longer durations, at lower or higher
temperatures by selecting a soiling level
depending on the soiling level on your
laundries.
Soiling levels are automatically set in some
programs. You can make changes at your
discretion.
level when you touch the soiling level key, it
means there is no soiling level selection in
the program you have selected.
will turn on in
EN - 17 EN - 17
Press the delay key until you reach the
time after which you want the machine
to start the washing cycle.
If you have skipped the delay time you
would like to set, you can keep pressing
the delay key until you reach that time
again.
To use the time delay function, you need
to press the Start/Pause key to start the
machine.
Note: After selecting the delay function,
If you did not press the Start/Pause key,
keep touching the delay key until the
electronic display shows the duration
of the program you have selected.
Once you see the program time on the
electronic display, this means that the
delay has been cancelled.
If you have pressed the Start/Pause key
to start the machine, you just need to
touch the delay key once.
on the electronic display, press "Start/
Pause" key to start the washing cycle.
Note: If there are no changes in the
will go off