Before Applying Power; Safety Precautions - Kenwood KD-291R Instruction Manual

A\Caution: Read this page carefully to ensure safe operation.
Before applying power
For the U.S.A. and Canada
Important!
Units shipped to the U.S.A. and Canada are designed for opera-
tion on 120 volts AC only.
Safety precaution for a Polarized AC plug
However, some products may be supplied with a non-polarized
plug.
CAUTION: To PREVENT ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
For the United Kingdom
Important!
Units shipped to the U.K. are designed for operation on
240 volts AC only.
The mains plug must be removed from the wall socket prior
to any internal examination.
The wires in this mains lead are coloured tn accordance with
the following code:
Neutral
The wires in this mains lead must be connected to the termi-
nals in the plug as follows:
Wire colour Plug terminal marking
BUG: Se peter nicebvece ihe ects. Nor Black
BrOWN .............2ceeeeeeeaeeseeerreeneee Lor Red
€ Brown to
Live
Blue to
Neutral wv)
Plug
Notes: —_—_—__$_$______________
1. If a 13-amp plug is used, this must be fitted with a 5-amp
fuse.
2. If a 3-pin plug with earthing contact is used, no wire must
be connected to the E terminal.
Safety precautions
For Australia and Europe
important!
Units shipped to Australia are designed for operation on 240 V
AC only.
Units shipped to Europe are designed for operation on 230 V
AC only.
For other countries
important!
Units shipped to countries other than the above countries are
equipped with an AC voitage selector switch under the turnta-
bie platter. Refer to the following paragraph for the proper set-
ting of this switch.
AC voltage selection
This unit operates on 110-120 or 220-240 volts AC. The AC
voltage selector switch under the turntable platter is set to the
voltage that prevails in the area to which the unit ts shipped.
Before connecting the power cord to your AC outlet, make sure
that the setting position of this switch matches your line vol-
tage. If not, it must be set to your voltage in accordance with
the following direction.
Note: ————________-_____---
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector
switch.
220—240 V amu ==> 110—120V
Move switch lever to match your fine voltage with a small screwdriver
or other pointed tool.
AC voltage selector switch
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTION
Rest CH FL Pe ERE SHOCK
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SER-
DONUT OPEN VICING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED 'DANGEROUS VOL-
TAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) IN-
STRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
KD-291R/RC {En}