Kenwood KD-64F Instruction Manual

FULL AUTOMATIC TURNTABLE
KD-64F
INSTRUCTION MANUAL
KENWOOD
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below.
Refer to the model and serial numbers whenever you call upon your
dealer for information or service on this product.
Model KD-64F Serial Number.
Unpacking
Unpack the unit carefully and make sure that all accessories are put
aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit is
damaged or fails to operate, notify your dealer immediately. If your
unit was shipped to you directly, notify the shipping company without
delay. Only the consignee (the person or company receiving the unit)
can file a claim against the carrier for shipping damage.
We recommend that you retain the original carton and packing
materials for use should you transport or ship the unit in the future.
Before applying power
Important!
U.S.A., Canada, Australia, U.K. and Europe
These units are not equipped with an AC voltage selector
switch and the discussion of such a switch that follows should
be disregarded.
All other countries
Units shipped to countries other than U.S.A., Canada,
Australia, U.K. and Europe are equipped with an AC voltage
selector switch on the rear panel. Refer to the following
paragraph for the proper setting of this switch.
AC voltage selection
This unit operates on 120 volts or 220 — 240 volts AC. The AC
voltage selector switch on the rear panel is set to the voltage that
prevails in the area to which the unit is shipped. Before connecting
the power cord to your AC outlet, make sure that the setting position
of this switch matches your line voltage. If not, it must be set to your
voltage in accordance with the following direction.
Note:
Our warranty does not cover damage caused by excessive line voltage due to
improper setting of the AC voltage selector switch.
220 — 240 Vw
setting
1. Before plugging in this unit, make sure that the position of the AC
voltage selector conforms to your line (mains) voltage. If not, it
must be reset. See Fig. 1-1.
2. To reset the selector, slide the stopper plate to the opposite side
with a screwdriver or other pointed tool. See Fig. 1-2.
3. Insert the power cord securely. See Fig. 1-3.
For United Kingdom
The mains piug must be removed from the wall socket prior to
any internal examination.
Important
The wires in this mains lead are coloured in accordance with
the following code:
BIUQ cbé.d cesta caducsnedsucdvoos te tees aay hs Neutral
BLOWN Secsikds cen eh Guahatetoun tenet oneuiaeden Live
The wires in this mains lead must be connected to the ter-
minals in the plug as follows:
Wire colour Plug terminal marking
BUG sss shudecenness ie Menaed Gaiaeerconeles N or Black
BOWN ais ccvescvars dictenestaidiesan eisecues L or Red
Brown to
Live
Blue to
Neutral
Plug
Notes:
1. If a 13-amp plug is used, this must be fitted with a 5-amp
fuse.
2. If a 3-pin plug with earthing contact is used, no wire must
be connected to the E terminal.
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
Safety precautions (U.S.A., Canada and Australia)
CAUTIO
RiSk OF ELECTRIC SHO
DO NOT GPE
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated ''dangerous voltage'' within the product's enclosure; that
may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
23456789101112/85 123456789101112/86