Unsuitable Cleaning Agents; Cleaning The Drip Tray And Waste Container - Miele CVA 7440 Operating And Installation Instructions

Built-in coffee machine
Table of Contents

Advertisement

Unsuitable cleaning agents

Contact with unsuitable cleaning
agents can alter or discolour all
surfaces. All surfaces of this
appliance are susceptible to
scratching. Scratches on glass
surfaces could cause a breakage in
certain circumstances.
Remove any residual cleaning agent
immediately. To protect the machine
and surrounding surfaces from
damage, make sure you remove any
spillages or splashes of descaling
agent immediately.
To avoid damaging the surfaces of your
appliance, do not use:
- cleaning agents containing soda,
alkalines, ammonia, acids or
chlorides
- solvent-based cleaning agents
- cleaning agents containing descaling
agents (unsuitable for cleaning the
appliance front)
- stainless steel cleaning agents
- dishwasher cleaners (unsuitable for
cleaning the appliance front)
- glass cleaning agents
- cleaning agents for ceramic cooktops
- oven cleaner
- abrasive cleaning agents, e.g.
powder cleaners and cream cleaners
- hard, abrasive brushes or sponges,
e.g. pot scourers, brushes or
sponges which have been previously
used with abrasive cleaning agents
- dirt erasers
Cleaning and care
- sharp metal scrapers
- steel wool or stainless steel wire
scourers
Cleaning the drip tray and
waste container
Danger of burning and scalding
on hot components or by hot liquids.
Components can become very hot
during operation. Touching hot
components can cause burning. The
liquids and steam dispensed are very
hot and can cause scalding.
If the pipework has just been rinsed,
wait a while before removing the drip
tray as the water used for rinsing will
still run out of the coffee spouts.
Please be aware that water in the
drip tray can also be very hot.
Do not touch hot components.
To avoid unpleasant smells and
mildew, clean the drip tray and waste
container every day.
A prompt will appear in the display
when the drip tray and/or the waste
container is full and needs to be
emptied. Empty the drip tray and the
waste container. The lid of the drip tray
does not need to be removed for
emptying.
53

Advertisement

Table of Contents
loading

Table of Contents