Programme Start - Programme End - Miele PWM 514 Operating And Installation Instructions

Programme start – programme end
30
Starting a programme
The programme can be started as soon as the Start/Stop sensor con-
trol is flashing on and off.
Touch the Start/Stop sensor control.

The door will lock ( symbol) and the wash programme will start.

Status

Time left
Whites
 prog. info
Tip: You can use the pull-down menu to display the selected temper-
ature, spin speed and any selected Extras.
If a delay start period ( Timer) has been selected, this will appear in
the display at the bottom left.

Overview

9,0/9,9 kg
Whites
90 °C
0:56 h
01.01 11:00 Help
If you select the  prog. info selection area, all programme-related in-
formation will be displayed.

Programme info

1: Time after start: min

2: Programme finish time:
3: Block:
4: Step:
 prog. info
Once the delay start period has elapsed (if applied), the programme
running time will appear in the display; otherwise, the running time
will appear straight away. The programme sequence is also shown in
the display.
Depending on the setting selected in the supervisor level or in the pro-
gramme, the machine will switch to the anti-crease action cycle at the
end of the programme. The door remains locked. The door can be un-
locked at any time by touching the Start/Stop sensor control.
Unloading the drum
Pull open the door.

Remove the laundry.

 11:02

2:27
Washing and heating
10:00
1300 rpm
Extras
Details
 11:02

2:27