LG S90TY Simple Manual

SIMPLE MANUAL
Wi-Fi
Soundbar
S90TY
MFL72100319
2311_Rev01 Copyright © 2024 LG Electronics Inc. All Rights Reserved.
S90TY.DSGPLLK_SIMPLE (Sheet)_MFL72100319.indd 1-3
ENGLISH
Specification
Power requirements
y Refer to the main label.
Power consumption
y Refer to the main label.
Dimensions (W x H x D): Approx. 1250.0 mm x 63.0 mm x
135.0 mm
Bus Power Supply (USB): 5 V 0 500 mA
Amplifier (Total RMS Output power): 570 W RMS
Open Source Software Notice Information
To obtain the source code that is contained in this product,
under GPL, LGPL, MPL, and other open source licenses that
have the obligation to disclose source code, and to access all
referred license terms, copyright notices and other relevant
documents, please visit https://opensource.lge.com.
LG Electronics will also provide open source code to you
on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping, and
handling) upon email request to opensource@lge.com.
This offer is valid to anyone in receipt of this information
for a period of three years after our last shipment of this
product.
www.lg.com
POWER: This unit operates on a mains supply of
110 - 240 V ~ 50 / 60 Hz.
Wiring: This unit is supplied with a BS 1363 approved main
plug. When replacing the fuse, always use a fuse of the
same rating and approved to BS 1362. Never use this plug
with the fuse cover omitted. To obtain a replacement fuse
cover contact your dealer. If the type of plug supplied is not
suitable for the mains sockets in your home, then the plug
should be removed and a suitable type fitted. Please refer to
the wiring instructions below:
Warning: A mains plug removed from the mains lead of
this unit must be destroyed. A mains plug with bared wires
is hazardous if inserted in a mains socket. Do not connect
either wire to the earth pin, marked with the letter E or
with the earth symbol 6 or coloured green or green and
yellow. If any other plug is fitted, use same rating of fuse in
the plug.
Important: The wires in this mains lead are coloured in
accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the
wires in the mains lead of this unit may not correspond with
the coloured marking identifying the terminals in your plug,
proceed as follows: The wire which is coloured blue must be
connected to the terminal which is marked with the letter N
or coloured black. The wire which is coloured brown must be
connected to the terminal which is marked with the letter L
or coloured red.
2024-01-24 3:11:36