LG CMS8450F/W Service Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Stereo System
  5. CMS8450F/W
  6. Service manual

LG CMS8450F/W Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Internal Use Only
Website http://biz.lgservice.com
MINI HI-FI SYSTEM
SERVICE MANUAL
MODEL: CM8450
(CM8450, CMS8450F/W)
CAUTION
BEFORE SERVICING THE UNIT, READ THE "SAFETY PRECAUTIONS"
IN THIS MANUAL.
P/NO : AFN77255256
MAY, 2015

Advertisement

Table of Contents
loading

Related Manuals for LG CMS8450F/W

Summary of Contents for LG CMS8450F/W

  • Page 1 Internal Use Only Website http://biz.lgservice.com MINI HI-FI SYSTEM SERVICE MANUAL MODEL: CM8450 (CM8450, CMS8450F/W) CAUTION BEFORE SERVICING THE UNIT, READ THE “SAFETY PRECAUTIONS” IN THIS MANUAL. P/NO : AFN77255256 MAY, 2015...
  • Page 2 CONTENTS SECTION 1 ..GENERAL SECTION 2 ..CABINET & MAIN CHASSIS SECTION 3 ..ELECTRICAL SECTION 4 ..REPLACEMENT PARTS LIST...

  • Page 3: Table Of Contents

    SECTION 1 SUMMARY CONTENTS SERVICING PRECAUTIONS ..........................1-3 ESD PRECAUTIONS ............................1-5 HIDDEN KEY MODE ............................1-6 SERVICE INFORMATION FOR EEPROM ......................1-7 PROGRAM DOWNLOAD GUIDE ........................1-8 FOTA UPDATE ..............................1-11 SPECIFICATIONS ............................1-12...

  • Page 4: Servicing Precautions

    SERVICING PRECAUTIONS NOTES REGARDING HANDLING OF THE PICK-UP 1. Notes for transport and storage 1) The pick-up should always be left in its conductive bag until immediately prior to use. 2) The pick-up should never be subjected to external pressure or impact. Storage in conductive bag Drop impact 2.
  • Page 5 NOTES REGARDING COMPACT DISC PLAYER REPAIRS 1. Preparations 1) Compact disc players incorporate a great many ICs as well as the pick-up (laser diode). These components are sensitive to, and easily affected by, static electricity. If such static electricity is high voltage, components can be damaged, and for that reason components should be handled with care.

  • Page 6: Esd Precautions

    ESD PRECAUTIONS Electrostatically Sensitive Devices (ESD) Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive Devices (ESD). Examples of typical ESD devices are integrated circuits and some field-effect transistors and semiconductor chip components. The following techniques should be used to help reduce the incidence of component damage caused by static electricity.

  • Page 7: Hidden Key Mode

    HIDDEN KEY MODE HIDDEN MODE KEYS Version Check Front Stop + RMC ‘ ’ for 5s EEPROM Initial Front Stop + RMC ‘ ’ for 5s EEPROM Edit Front Stop + RMC ‘ ’ for 5s APD Test Display Front Stop + RMC ‘3’ for 5s Clip Front Stop + RMC ‘Mute’...

  • Page 8: Service Information For Eeprom

    SERVICE INFORMATION FOR EEPROM POWER ON It is possible at any function. (ex. It is possible at VFD “NO USB” status, too.) VFD “NO DISC” status This is an example. Front ‘STOP’ + Remote control “ ” push same timing during 5s FLD “OP00-…..”...

  • Page 9: Program Download Guide

    PROGRAM DOWNLOAD GUIDE 1. AUDIO PROGRAM Download program file name must be MICOM_CM8450_YYMMDDX.HEX If security program(Water Wall) is activated on PC, you must save the file to the USB storage device and disable the security software, then download the file to your set. Downloading file proceeds in the same way at USB1 function and USB2 function.
  • Page 10 2. CD PROGRAM Download program file name must be HG580_CM8450_YYMMDDX.bin If security program(Water Wall) is activated on PC, you must save the file to the USB storage device and disable the security software, then download the file to your set. Downloading file proceeds in the same way at USB1 function and USB2 function.
  • Page 11 3. EQ PROGRAM Download program file name must be EQ_PRG.BIN If security program(Water Wall) is activated on PC, you must save the file to the USB storage device and disable the security software, then download the file to your set. Downloading file proceeds in the same way at USB1 function and USB2 function.

  • Page 12: Fota Update

    FOTA UPDATE Step1 : App connecting Step2 : Step3 : (Check FW version) Device version info Select update button Step4 : Step5 : Step6 : Download from CDN server Transfer FW FW Flash Writing Step7 : FOTA complete 1-11...

  • Page 13: Specifications

    SPECIFICATIONS • GENERAL Power requirements Refer to the main label. Power consumption Refer to the main label. Networked standby : 0.4 W (If all network ports are activated.) Dimensions (W x H x D) 450 mm x 160 mm x 335 mm Net Weight (Approx.) 5.8 kg Operating temperature...
  • Page 14 SECTION 2 CABINET & MAIN CHASSIS CONTENTS EXPLODED VIEWS ............................2-3 1. CABINET AND MAIN FRAME SECTION ....................2-3 2. MECHANISM DECK SECTION ........................ 2-5 3. PACKING ACCESSORY SECTION ......................2-7 4. SPEAKER SECTION ..........................2-8...

  • Page 16: Exploded Views

    EXPLODED VIEWS 1. CABINET AND MAIN FRAME SECTION NOTES) THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE SERVICE PERSONNEL TO THE PRESENCE OF IMPORTANT SAFETY INFORMATION IN SERVICE LITERATURE. SMPS MAIN FRONT_CTRL FRONT NFC Tag CABLE2 CABLE1...

  • Page 17: Mechanism Deck Section

    2. MECHANISM DECK SECTION 1439 1002 A001 1005 1001 1026 1003 1004 1030 1024 1437 1437 1024 1024 1012 1049 1437 1024 1015 1016 1013 1020 1011 A006 1019 1043 1018 1045 A005 1439...

  • Page 18: Packing Accessory Section

    3. PACKING ACCESSORY SECTION 808 Batteries Owner’s manual 900 Remote Control 825 FM Antenna Packing 804 Bag 802 Box...

  • Page 19: Speaker Section

    4. SPEAKER SECTION 4-1. FRONT SPEAKER A60L A60R...
  • Page 20 4-2. SUBWOOFER...
  • Page 21 2-10...
  • Page 22 SECTION 3 ELECTRICAL CONTENTS ONE POINT REPAIR GUIDE ..........................3-2 1. NO POWER ............................3-2 2. NO AMP POWER ........................... 3-3 3. NO BOOTING WHEN POWER ON THE SET..................3-4 4. VFD IS NOT DISPLAYED WHEN POWER ON THE SET ..............3-5 5.

  • Page 23: One Point Repair Guide

    ONE POINT REPAIR GUIDE 1. NO POWER If the unit doesn’t work by no power problem, repair the set according to the following guide. 1-1. FUSE/ BRIDGE DIODE/ THERMISTOR 1-1-1. Solution Please check and replace F901, BD901, TH900, TH901 on SMPS board. 1-1-2.

  • Page 24: Amp Power

    ONE POINT REPAIR GUIDE 2. NO AMP POWER If the unit doesn’t work by no ±PVDD problem, repair the set according to the following guide. 2-1. FUSE/ FET 2-1-1. Solution Please check and replace F911, Q905~Q906 on SMPS board. 2-1-2. How to troubleshoot (Countermeasure) 1) Check if the fuse F911 is open or short-circuit.

  • Page 25: Booting When Power On The Set

    ONE POINT REPAIR GUIDE 3. NO BOOTING WHEN POWER ON THE SET The set doesn’t work when press the power button on the FRONT_CTRL board or the remote control. 3-1. IC501 3-1-1. Solution Replace IC501 on MAIN board. 3-1-2. How to troubleshoot (Countermeasure) 1) Check the 5.6 VA (CN106) and DVCC_3.3 V (IC505) in standby mode.

  • Page 26: Vfd Is Not Displayed When Power On The Set

    ONE POINT REPAIR GUIDE 4. VFD IS NOT DISPLAYED WHEN POWER ON THE SET When power on the set, any icons or characters on VFD are not displayed. 4-1. VFD (VFD301) 4-1-1. Solution Please check and replace VFD301 on FRONT board. 4-1-2.

  • Page 27: Audio Output Is Small Or No Audio Output

    ONE POINT REPAIR GUIDE 5. AUDIO OUTPUT IS SMALL OR NO AUDIO OUTPUT Audio signal output is small or not. when you power on the Middle Power Mini System. 5-1. AMP IC (IC700~IC705) 5-1-1. Solution Replace IC700~IC705 on MAIN board. 5-1-2.

  • Page 28: Power On (Standby Led Is Blinking)

    ONE POINT REPAIR GUIDE 6. NO POWER ON (STANDBY LED IS BLINKING) It doesn’t turn on, and blinks standby LED(Red). 6-1. AMP FETs 6-1-1. Solution Replace AMP FET on MAIN board. 6-1-2. How to troubleshoot (Countermeasure) 1) This symptom occurs, when DC protection is detected. Main reasons are like below. - When some of AMP FETs dead.

  • Page 29: Speaker No Audio

    ONE POINT REPAIR GUIDE 7. SPEAKER NO AUDIO Speaker No Audio 7-1. AMP IC (IC700~IC705) 7-1-1. Solution Replace IC700~IC705 on MAIN board. 7-1-2. How to troubleshoot (Countermeasure) 1) Check supply voltage of AMP(CN110) & PWM signal Normal supply voltage and signal  Check AMP IC. Poor supply voltage ...
  • Page 30 ONE POINT REPAIR GUIDE 8. NO BOOTING IN CD/USB FUNCTION After you turn on power key and displayed message in the following order (HELLO  VOL XX  CD or USB) on VFD, it will not display other message on VFD, and it will not boot-up normally. 8-1.

  • Page 31: Booting In Cd/Usb Function

    ONE POINT REPAIR GUIDE NO BOOTING IN CD/USB FUNCTION After you turn on power key and displayed message in the following order (HELLO  VOL XX  CD or USB) on VFD, it will not display other message on VFD, and it will not boot-up normally. 8-2.
  • Page 32 ONE POINT REPAIR GUIDE NO BOOTING IN CD/USB FUNCTION After you turn on power key and displayed message in the following order (HELLO  VOL XX  CD or USB) on VFD, it will not display other message on VFD, and it will not boot-up normally. 8-3.
  • Page 33 ONE POINT REPAIR GUIDE NO BOOTING IN CD/USB FUNCTION After you turn on power key and displayed message in the following order (HELLO  VOL XX  CD or USB) on VFD, it will not display other message on VFD, and it will not boot-up normally. 8-4.
  • Page 34 ONE POINT REPAIR GUIDE NO BOOTING IN CD/USB FUNCTION After you turn on power key and displayed message in the following order (HELLO  VOL XX  CD or USB) on VFD, it will not display other message on VFD, and it will not boot-up normally. 8-5.
  • Page 35 ONE POINT REPAIR GUIDE 9. NO OPERATION OF MD When no sound output in the CD function, you can not listen to music reading data from a CD disc if the servo motors in MD don’t work. This step is for checking the spindle motor among them.

  • Page 36: Operation Of Md

    ONE POINT REPAIR GUIDE NO OPERATION OF MD When no sound output in the CD function, you can not listen to music reading data from a CD disc if the servo motors in MD don’t work. This step is for checking the sled motor among them. 9-2.
  • Page 37 ONE POINT REPAIR GUIDE NO OPERATION OF MD When no sound output in the CD function, you can not listen to music reading data from a CD disc if the servo motors in MD don’t work. This step is for checking the tray open/close motor among them.
  • Page 38 ONE POINT REPAIR GUIDE NO OPERATION OF MD When no sound output in the CD function, you can not listen to music reading data from a CD disc if the pickup module in MD doesn’t work. This step is for checking the laser tracking actuator. 9-4.
  • Page 39 ONE POINT REPAIR GUIDE NO OPERATION OF MD When no sound output in the CD function, you can not listen to music reading data from a CD disc if the pickup module in MD doesn’t work. This step is for checking the laser focusing actuator. 9-5.
  • Page 40 ONE POINT REPAIR GUIDE 10. NO SOUND There is no sound output in the USB function, repair the set according to the following guide. 10-1. USB FUNCTION 10-1-1. Solution Replace IC501 on MAIN board, IC312 on FRONT board. 10-1-2. How to troubleshoot (Countermeasure) 1) Check +5 VU to FRONT board.

  • Page 41: Sound

    ONE POINT REPAIR GUIDE NO SOUND There is no sound output in the AUX function, repair the set according to the following guide. 10-2. AUX FUNCTION 10-2-1. Solution Replace IC201 on MAIN board. 10-2-2. How to troubleshoot (Countermeasure) 1) Check AUX_L/R signals to IC201 (pin23, 24). 2) Check if MCS_BCK, MCS_LRCK, &...
  • Page 42 ONE POINT REPAIR GUIDE NO SOUND There is no sound output in the PORT. IN function, repair the set according to the following guide. 10-3. PORT. IN FUNCTION 10-3-1. Solution Replace IC201 on MAIN board. 10-3-2. How to troubleshoot (Countermeasure) 1) Check PT_L/R signal from FRONT board to MAIN board.
  • Page 43 ONE POINT REPAIR GUIDE NO SOUND There is no sound output in the TUNER function, repair the set according to the following guide. 10-4. TUNER FUNCTION 10-4-1. Solution Replace IC201, TU500 on MAIN board. 10-4-2. How to troubleshoot (Countermeasure) 1) Check if TUNER_L/R is entered from pin1 & 3 of TU500 to IC201(pin26, 27). ...
  • Page 44 ONE POINT REPAIR GUIDE NO SOUND There is no sound output in the MIC IN function, repair the set according to the following guide. 10-5. MIC IN FUNCTION 10-5-1. Solution Replace IC200, IC206 on MAIN board. 10-5-2. How to troubleshoot (Countermeasure) 1) Check MIC_SIG signal to pin33 of CN605.
  • Page 45 ONE POINT REPAIR GUIDE NO SOUND There is no sound output in the Bluetooth function, repair the set according to the following guide. 10-6. BLUETOOTH FUNCTION 10-6-1. Solution Replace IC501 on the MAIN board or B/T module on the Front Panel. 10-6-2.

  • Page 46: Electrical Troubleshooting Guide

    ELECTRICAL TROUBLESHOOTING GUIDE 1. POWER SUPPLY ON SMPS BOARD No output 5.6 VA Replace F901 (same fuse). Is the F901 normal? Replace BD901. Is BD901 normal? Is the VCC Is D960/ D961 normal? (11 V ~ 25 V) supplied to IC901 pin4? Power line of MAIN PCB is short.
  • Page 47 ELECTRICAL TROUBLESHOOTING GUIDE No -5 V Is the Is the D959 normal? Check or replace D959. VCC -7 VA supplied to IC953 pin2? Check or replace Q951. Is there ‘H’ signal at Q953 Check P_CTL from μ-com. Base? Check or replace Q953, Q957. Or check line of MAIN PCB is short or not.
  • Page 48 ELECTRICAL TROUBLESHOOTING GUIDE No AMP output Is the Is the C904 Voltage Check PFC P.CTL from μ-com. PFC P.CTL OK? about 390 V? Is the VCC 12 V supplied to Replace D908, Q955, PC903. IC904 pin16? Check or replace IC904, Q907~Q910. Is the Is F911 normal? Check AMP P.CTL from μ-com.

  • Page 49: System Part

    ELECTRICAL TROUBLESHOOTING GUIDE 2. SYSTEM PART Power on. CN605 “HELLO” cable connection Display on MLD Check FFC cable. CN605 pin14, 15, 16, 24 power Check SMPS board. CN605 pin8, 9, 10 data signal Check MAIN board. FL+/- & VKK voltage OK? Replace VFD301.

  • Page 50: Audio Check

    ELECTRICAL TROUBLESHOOTING GUIDE 3. NO AUDIO CHECK CD FUNCTION Is Motor_open/ close OK? LOAD +, - OK? disc insert? (IC400 pin6, 7) Check IC501. Is motor impedance Check loading motor. about 12 Ω? Check IC400. Focusing/ OPU driving Tracking/ Sled signal Disc reading OK? (Focusing &...
  • Page 51 ELECTRICAL TROUBLESHOOTING GUIDE USB FUNCTION When insert USB, IC312 USB Power Replace IC312. IC501 pin U7, U8, A7, A8 +5 VU OK? USB_D signal OK? AUX FUNCTION IC201 Check audio cable. pin23, 24 AUX input signal IC201 Check IC501. pin42, 43, 44 I2S input signal IC201 Replace IC201.
  • Page 52 ELECTRICAL TROUBLESHOOTING GUIDE PORTABLE FUNCTION IC201 Check FRONT board. pin9, 10 PT_L/R input signal IC201 Check IC501. pin42, 43, 44 I2S input signal IC201 pin41 Replace IC201. ADC_DATA_IN output signal TUNER FUNCTION TU500 IC201 pin26, 27 TUNER_L/R output TUNER_L/R input signal Check +3.3 V of TU500.
  • Page 53 ELECTRICAL TROUBLESHOOTING GUIDE IC501 Check IC501. pin D1, D2, E1 I2S Clock signal IC501 Check IC501. pin E2 I2S data signal IC202 Replace IC202. PWM data output signal 3-32...
  • Page 54 ELECTRICAL TROUBLESHOOTING GUIDE pin47~50 pin45, 46 of IC202, of IC202, FL/FR± signal SW1± signal OK? Check IC202. Check IC202. IC203, IC204 IC205 FL/FR audio signal OK? SW1 audio signal OK? Check IC203, IC204. Check IC205. pin13 of pin13 of IC705 IC700, IC701, IC702, IC703 SW1 audio signal OK? FL/FR audio signal OK?

  • Page 55: Lighting (Speaker Led)

    ELECTRICAL TROUBLESHOOTING GUIDE 4. NO LIGHTING (SPEAKER LED) Power on Check Q610~Q618, Q1103~Q1105. White is turn on? IC601 LED_5V Check IC601. Check speaker. 3-34...

  • Page 56: Waveforms Of Major Check Point

    WAVEFORMS OF MAJOR CHECK POINT 1. DSP (IC501) X X I X X I Fig 1-1. Crystal of RTC 32.768 MHz Fig 1-2. Crystal of system 24 MHz (R5D6) X501 ( Main DSP : R508,R509) X500 3-35...

  • Page 57: Pwm (Ic202)

    2. PWM (IC202) X X I Fig 2-1. Crystal 24.576 MHz Fig 2-2. DSP to PWM I2S (IC202 pin4, 5) X200 IC202 pin26~30 3-36...

  • Page 58: Servo (Ic401)

    3. SERVO (IC401) X X I Fig 3-1. Crystal 16.9344 MHz Fig 3-2. CD-16M (X400) (IC401 pin31) 3-37...

  • Page 59: Motor Driver (Ic400)

    4. MOTOR DRIVER (IC400) Fig 4-2. SL- & SL+ for Driving SPINDLE Motor Fig 4-1. LO- & LO+ / MOT_OPEN & MOT_CLOSE (IC400 pin11, 12) for Driving TRAY Motor (IC400 pin6, 7, 9, 10) Fig 4-3. SP- & SP+ for Driving SPINDLE Motor (IC400 pin17, 18) 3-38...

  • Page 60: Adc (Ic201)

    5. ADC (IC201) 6. USB (CN502) Fig 5. ADC I2S Fig 6. USB D+/ D- (IC201 pin42, 43, 44) (CN502 pin5, 6, 8, 9) 3-39...

  • Page 61: Bluetooth (Cn504)

    7. BLUETOOTH (CN504) B B T_TX BT_TX BT_TX BT_RX BT_RX BT_RX BT_RST BT_RST BT_RST Fig 7. BT_TX / BT_RX / BT_RST (CN504 pin4, 6, 9) 3-40...

  • Page 62: Wiring Diagram

    WIRING DIAGRAM Harness 10P, 1.25mm FRONT_CTRL FRONT 33P, 1.25mm Portable 33P, 1.25mm 10P, 1mm 15P, 2.5mm 10P, 1.25mm MAIN SMPS 3-41 3-42...

  • Page 63: Block Diagrams

    BLOCK DIAGRAMS 1. SYSTEM BLOCK DIAGRAM USB1 USB2 SCRATCH A/B, M_VOL_A/B, CD_RST DRV632 SERVO FAN_CTRL /2, A,B,C,D,E,F,PD (VCC50) PCM5101 Search_A /B,EQ HIGH/LOW BU9546 P/UP (4X Speed) CD_RW/ MCLK/ LRCK/ BCK, SPDO/SLDO CD_DAT /FOD/TRD D2S+/ - MOT_MUTE,CLOSE,OPEN AM5890 LOAD±,SLED±, Motor Drive SPIN±,TR±,F±...

  • Page 64: Smps Block Diagram

    2. SMPS BLOCK DIAGRAM MAIN SMPS 14 VA (STR-2A153D) Flyback MAIN OPAMP - 5 V TRANS u-com / BT PFC Out 5.6 VA USB / MPEG (380 V) Motor Dirve PFC IC (R2A20112A) 12 V FAN/LED/Mic Totem 20 A pole 600 V On/Off Interleaved...

  • Page 65: Power Block Diagram

    3. POWER BLOCK DIAGRAM IC202 IC101 IC401 IC602 IC604 Expander MICOM RF IC TUNER PCM5101 DRV632 BU2090F PS9860 R5F100G BU9546 77 mA 3.2 mA 80 mA 22 mA 10 mA 10 mA 70 mA DVCC_3.3 V IC505 →MCS_3.3 V +5.6 VA LDO(1 A) MCS_3.3 V TJ4220GDP...

  • Page 66: Circuit Diagrams

    BE MODIFIED OR ALTERED WITHOUT PERMISSION FROM THE ACTUAL CIRCUIT USED. THIS WAY, 2. Voltages are DC-measured with a digital voltmeter FROM THE LG CORPORATION. ALL COMPONENTS IMPLEMENTATION OF THE LATEST SAFETY AND during Play mode. SHOULD BE REPLACED ONLY WITH TYPES PERFORMANCE IMPROVEMENT CHANGES INTO 1.

  • Page 67: Smps - Power #2 Circuit Diagram

    BE MODIFIED OR ALTERED WITHOUT PERMISSION FROM THE ACTUAL CIRCUIT USED. THIS WAY, 2. Voltages are DC-measured with a digital voltmeter FROM THE LG CORPORATION. ALL COMPONENTS IMPLEMENTATION OF THE LATEST SAFETY AND during Play mode. SHOULD BE REPLACED ONLY WITH TYPES PERFORMANCE IMPROVEMENT CHANGES INTO 2.

  • Page 68: Main - Cd Dsp Circuit Diagram

    3. MAIN - CD DSP CIRCUIT DIAGRAM CD DSP : WAVEFORM NUMBER EAX66215801_1.7(22)-SD(#1) 2015. 01. 07 3-53 3-54...

  • Page 69: Main - Adc/ Pwm Circuit Diagram

    4. MAIN - ADC/ PWM CIRCUIT DIAGRAM ADC/ PWM : WAVEFORM NUMBER EAX66215801_1.7(22)-SD(#2) 2015. 01. 07 3-55 3-56...

  • Page 70: Main - Rf Servo Circuit Diagram

    5. MAIN - RF SERVO CIRCUIT DIAGRAM : WAVEFORM NUMBER RF SERVO EAX66215801_1.7(22)-SD(#3) 2015. 01. 07 3-57 3-58...

  • Page 71: Main - Exp/ Visense Circuit Diagram

    6. MAIN - EXP/ VISENSE CIRCUIT DIAGRAM EXP/ VISENSE EAX66215801_1.7(22)-SD(#4) 2015. 01. 07 3-59 3-60...

  • Page 72: Main - Amp Circuit Diagram

    7. MAIN - AMP CIRCUIT DIAGRAM EAX66215801_1.7(22)-SD(#5) 2015. 01. 07 3-61 3-62...

  • Page 73: Main - Mic/ Aux Circuit Diagram

    8. MAIN - MIC/ AUX CIRCUIT DIAGRAM MIC/ AUX EAX66215801_1.7(22)-SD(#6) 2015. 01. 07 3-63 3-64...

  • Page 74: Front Circuit Diagram

    9. FRONT CIRCUIT DIAGRAM FRONT EAX66215203_1.0(1)-SD 2015. 01. 21 3-65 3-66...

  • Page 75: Front_Ctrl Circuit Diagram

    10. FRONT_CTRL CIRCUIT DIAGRAM CTRL_A EAX66233401_1.7(22)-SD 2015. 01. 07 3-67 3-68...

  • Page 76: Circuit Voltage Chart

    CIRCUIT VOLTAGE CHART 1. CAPACITORS 2. CONNECTORS 100 V-10 % -20 % +20 % No Pin Pin Name Spec. Input Voltage Output Voltage 240 V/50 Hz+10 % Value Value SPEC (88 V, 60 Hz) (288 V, 60 Hz) Location Capacitor Voltage_Spec Location Capacitor...

  • Page 77: Printed Circuit Board Diagrams

    PRINTED CIRCUIT BOARD DIAGRAMS 1. SMPS P.C.BOARD (TOP VIEW) 3-71 3-72...
  • Page 78 SMPS P.C.BOARD (BOTTOM VIEW) NOTE) Warning Parts that are critical with respect to risk of fire or electrical shock. 3-73 3-74...

  • Page 79: Main P.c.board

    2. MAIN P.C.BOARD (TOP VIEW) 3-75 3-76...
  • Page 80 MAIN P.C.BOARD (BOTTOM VIEW) 3-77 3-78...

  • Page 81: Front P.c.board

    3. FRONT P.C.BOARD (TOP VIEW) 3-79 3-80...
  • Page 82 FRONT P.C.BOARD (BOTTOM VIEW) 3-81 3-82...

  • Page 83: Front_Ctrl P.c.board

    4. FRONT_CTRL P.C.BOARD (TOP VIEW) (BOTTOM VIEW) 3-83 3-84...

This manual is also suitable for:

Cm8450

Table of Contents