22
Setting
Use this function to select your desired startup screen. If you
change the setting, it will take effect when you exit the OSD
menu.
•
Startup Screen
•
•
Source Selection
•
Selecting "On" enables the function. The MHL port(s) and the
DC 5V out port/USB A port (if available) on the projector can
output 5V power when the projector is turned on or in
USB 5V
standby mode.
(Standby)
Selecting "On" allows synchronized power ON/OFF operation
between the projector and a CEC-compatible device
connected to the HDMI/MHL port of the projector.
HDMI CEC
This function is especially suitable for gaming environment. It
reduces input to output latency and helps create a seamless
experience.
Low Input Lag
Acer: The default startup screen of your Acer projector.
User: Use the picture you transfer to the projector. See
"Acer Splash Downloader" for how to transfer the
picture.
Manual: When switching input signals, you need to press
"SOURCE" on the control panel or remote control, or
the direct source key on the remote control.
Auto: The projector will detect your source
automatically.
Only MHL port(s) will provide power output when
MHL port(s) and USB A port are both plugged.
This function is only available for the HDMI/MHL port.
This function is only available for certain input timings.
After turned on, performing Auto Keystone or
adjusting the following settings will deactivate this
function: Aspect ratio, Keystone, H. Position, V.
Position, Frequency, HDMI Scan Info, Digital Zoom.
When Display Mode is Game Dark or Game Bright, this
function will be automatically turned on.