User Maintenance - Panasonic EH2501 Operating Instructions Manual

User-maintenance
instructions
After
using the Pore Cleanser both the
main body and
the
cup can be
washed
using
water.
1.
Put
some
water
(warm
if
you
like) in
a
washbowl.
Do
not use hot
water
(over
70°C(150°F)).
2.
Remove
the cup,
soak
the suction point
in
the water,
and
clean
for
approximately
15
seconds
while
keeping
the suction
increase button pressed.
Note:
The
suction increase button
must be
kept
pressed
while cleaning.
*
Do
not
use
detergent.
*
Do
not
press the mist button while
cleaning.
4. Drain the
water from the
water tank
and
leave
it
to
dry with
the "water tank
cap"
open.
5.
Wipe
the
main body and
the
cup
with
facial
tissues
or
cotton
swabs,
taking par-
ticular
care
to
clean
carefully inside the
cup.
How
to clean the
Pore Cleanser
•
Suction
point
(filter)
Turn the
switch
off
and remove any
ac-
cumulated
dirt
using the cleaning
brush
that
is
provided.
*
Do
not
use the cleaning
needle
to
clean
this.
3.
Lift
the
main body
out
of
the
water
and
release your
finger
from
the suction
in-
crease
button.
While
the
pore cleanser
is
still
on,
shake
the
main body
about
ten
times
to
remove
the
water from
in-
side.
When
shaking the
main
body,
make
sure the suction
in-
crease
button
is
facing
down.
Cleaning brush
Cleaning needle cap
•
Water
tank
Turn the switch
off
and
clean the
inside
of
the
water tank using the cleaning
brush
that
is
provided.
9