Table of Contents
Advertisement
en Utensils
Using detergent with a rinse
aid component
I n general, you can use detergent with
D e t e r g e n t w i t h a r i n s e a i d c o m p o n e n t
a rinse aid component up to a water
hardness level of 21 °dH (37 °fH, 26
°Clark, 3.7 mmol/L) without adding
rinse aid. Above a water hardness value
of 21 °dH, use additional rinse aid.
Switching off rinse aid refill
indicator
If the rinse aid refill indicator h
bothers you (e.g. if you are using a
combination detergent with a rinse aid
component), you can switch off the
rinse aid refill indicator.
Proceed as described under "Setting
rinse aid quantity" and set the level to
§:‹‹. The rinse aid refill indicator h is
switched off.
18
-
Utensils
N ot suitable
U t e n s i l s
Cutlery and utensils made of wood.
■
Delicate decorative glasses, craft
■
and antique utensils. These decors
are not dishwasher-proof.
Plastic parts not resistant to heat.
■
Copper and tin utensils.
■
Utensils which are soiled with ash,
■
wax, lubricating grease or ink.
Aluminium and silver parts have
a tendency to discolour and fade during
the wash cycle. Even some types of
glass (e.g. crystal glass objects) may
turn cloudy after many wash cycles.
Glass and utensil damage
Causes:
Glass type and glass production
■
process.
Chemical composition of the
■
detergent.
Water temperature of the wash
■
programme.
Recommendation:
Use only glasses and porcelain
■
which the manufacturer designates
as dishwasher-proof.
Use a detergent which protects
■
utensils.
Take glass and cutlery out of
■
the dishwasher as soon as possible
after the programme ends.
Advertisement
Table of Contents
