33 OPERATION Before Use Loading the Dryer Control Panel Dry Cycles Cycle Modifiers Settings and Extra Functions 48 SMART FUNCTIONS LG ThinQ Application Smart Diagnosis Function 52 MAINTENANCE Regular Cleaning 54 TROUBLESHOOTING FAQs Before Calling for Service 60 LIMITED WARRANTY...
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Safety for a Dryer WARNING Fire Hazard Failure to follow safety warnings exactly could result in serious injury, death or property damage. Do not install a booster fan in the exhaust duct. •...
IMPORTANT SAFETY INSTRUCTIONS WARNING Risk of Fire Install the clothes dryer according to the manufacturer’s instructions and local codes. Clothes dryer installation must be performed by a qualified installer. • Do not install a clothes dryer with flexible plastic venting materials. If •...
Page 5
IMPORTANT SAFETY INSTRUCTIONS • The appliance must be installed and electrically grounded by qualified service personnel in accordance with local codes. • Disconnect the power cord, house fuse or circuit breaker before installing or servicing the appliance. • When moving or installing the appliance in a different location, call qualified service personnel for installation and service.
Page 6
• Do not grasp the power cord or touch the appliance controls with wet hands. • Do not modify or extend the power cord. • If the appliance has been submerged, contact an LG Electronics customer information center for instructions before resuming use.
Page 7
IMPORTANT SAFETY INSTRUCTIONS • Do not put living animals such as pets inside the appliance. • Do not put any part of your body, such as your hands or feet, or metal objects under the appliance. • Do not let your hand get pinched when opening or closing the dryer door. •...
PRODUCT OVERVIEW PRODUCT OVERVIEW Product Features The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. Front View Control panel Lint filter Leveling feet Reversible door Rear View...
Page 9
PRODUCT OVERVIEW Product Specifications Model DL*X860**E Description Steam Dryer Please refer to the rating label for detailed Electrical Requirements information. Min. / Max. Water Pressure 20 - 120 psi (138 - 827 kPa) Dimensions (Width X Depth X Height) 27'' X 29 1/4'' X 42 3/4'' (68.6 cm X 74.3 cm X 108.7 cm) Maximum Depth with Door Open 50 1/2'' (128.4 cm) Gas : 123.5 lb (56.0 kg)
Page 10
10 PRODUCT OVERVIEW NOTE • For your safety and extended product life, use only authorized components. The manufacturer is not responsible for product malfunction or accidents caused by the use of unauthorized components or parts.
INSTALLATION INSTALLATION Before Installing Installation Overview Please read the following installation instructions first after purchasing this dryer or transporting it to another location. Choose the proper location. Level the appliance. Vent the appliance. Connect the inlet hose (for steam models). Connect the Gas / Electric dryer.
12 INSTALLATION Choosing the Proper • For garage installation, you will need to place the appliance at least 18 inches (45.7 cm) above the Location floor. The standard pedestal height is 15 inches (38 cm). You will need 18 inches (45.7 cm) from the garage floor to the bottom of the appliance.
Page 13
INSTALLATION Dimensions and Clearances The following clearances are recommended for the appliance. • Additional clearances should be considered for ease of installation and servicing. • Additional clearances should be considered on all sides of the dryer to reduce noise transfer. Installation Spacing for Recessed Area or Closet Installation Description Dimension/Clearance...
Page 14
14 INSTALLATION NOTE • There should be at least a little space around the dryer (or any other appliance) to eliminate the transfer of vibration from one appliance to another. If there is enough vibration, it could cause appliances to make noise or come into contact, causing paint damage and further increasing noise.
INSTALLATION Leveling the Appliance NOTE • If you are installing the appliance on the optional WARNING pedestal, you must use the leveling feet on the • Use long-sleeved gloves and safety glasses. pedestal to level the appliance. The appliance leveling feet should be fully retracted. •...
Page 16
16 INSTALLATION Do NOT remove the upper screw behind the hinge bracket. Set the parts aside. CAUTION • Do NOT remove any of the eight screws on the face of the cabinet (marked below). Doing so Remove the four hinge screws. could result in damage to the dryer and the need •...
Page 17
INSTALLATION Reverse the components inside the door. • You will now be removing and reversing various components inside the door. See a few page later for a detailed diagram and identification of the inner structure and parts of the door. (The diagram shows the “before view”...
Page 18
18 INSTALLATION hinge bracket out. Set it aside. Remove the two screws from the lower hinge assembly on the bottom left and lift the hinge assembly out. Reverse the upper hinge assembly and hinge filler. • Carefully lift the upper hinge assembly- inner top lock rod (on the left) out of the outer door frame.
Page 19
INSTALLATION 5) Mount the lower hinge bracket and the Reinstall the side interlock button. filler on the left side of the door with the • Reinstall the side interlock button screw removed in a previous step. removed in step 3. Center the spring in the compartment and insert the interlock button on top of it.
NOTE • An adapter kit, part number 383EEL9001B, may be purchased from your LG retailer. This kit contains duct components necessary to change the appliance vent location. • While supporting the door, install the two small hinge screws removed from the •...
INSTALLATION Press the tabs on the knockout Press the adapter duct onto the blower carefully remove the knockout for the desired housing and secure it to the base of the dryer vent opening. (Right-side venting is not as shown. available on gas models.) Press the adapter duct onto the blower housing and secure to the base of the dryer as shown.
Page 22
22 INSTALLATION Maximum length WARNING No. of of 4-inch Wall Cap Type 90° • Do not exceed the recommended duct length diameter rigid Elbows limitations noted in the chart. Failure to follow metal duct these instructions may result in extended drying times, fire or death.
INSTALLATION Gas Supply Requirements Correct Venting WARNING • DO NOT attempt any disassembly of the dryer; disassembly requires the attention and tools of an authorized and qualified service technician or company. • DO NOT use an open flame to inspect for gas leaks.
24 INSTALLATION • Installation and service must be performed by a qualified installer, service agency, or the gas supplier. • The dryer is configured for natural gas when shipped from the factory. Make sure that the dryer is equipped with the correct burner nozzle for the type of gas being used (natural gas or propane gas).
Page 25
INSTALLATION • The appliance has its own terminal block that • Use a 30-amp, 240-volt, 4-wire, UL-listed must be connected to a separate 240 VAC, 60- power cord with #10 AWG-minimum copper Hertz, single-phase circuit, fused at 30 amperes. conductor and closed loop or forked terminals (The circuit must be fused on both sides of the with upturned ends.
Page 26
26 INSTALLATION Install UL-listed strain relief into the power cord through-hole. Thread the 4-wire #10 AWG minimum copper power cable prepared in step 1 through the strain relief. White Wire moved from Ground Screw Hot Leads of Power Cord (Black and Red) Neutral Wire (White) Power Cord Ground Wire Terminal Block...
Page 27
INSTALLATION Hot Leads of Power Cord (Black and Red) Connect the external ground (if required by local codes) to the green ground screw. Neutral Wire (White) Power Cord Ground Wire Tighten all screws securely. Ground Screw Reinstall the terminal block access cover. Three-Wire Power Cord •...
Old hoses could UL-listed strain relief leak or burst causing flooding and property damage. Contact an LG Customer Information UL-listed 3-wire power cord Center for assistance in buying hoses. Attach the two hot leads (black and red) of the...
Page 29
INSTALLATION washer hose to the washer and the there is a rubber seal in place in both ends other side of the Y-connector of each hose to prevent leaking. Check the type of installation and connect the hose to the faucet. Connect all water supply hoses tightly by hand and then tighten another 2/3 turn with pliers.
30 INSTALLATION the exhaust duct can be measured with a manometer, placed on the exhaust duct approximately 2 ft. (60.9 cm) from the dryer. Static pressure in the exhaust duct should not exceed 0.6 inch (1.5 cm). The dryer should be checked while the dryer is running with no load.
Page 31
INSTALLATION Error Messages Press the Start/Pause button. Check the error message before you call for • The appliance will start the test, which will service. last a few minutes. The heat will be turned on and the temperatures in the drum will be Error Message Possible Cause &...
Page 32
32 INSTALLATION Check for blockages and lint buildup. Make sure the ductwork is not crushed or restricted.
OPERATION OPERATION Before Use WARNING • To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Operation Overview • Not all modifiers and options are available on all cycles. Clean the Lint Filter •...
34 OPERATION Loading the Dryer dryer with a loose or missing lint filter will damage the dryer and articles in the dryer. NOTE When you open the Easy-Load door • For the best drying performance and most efficient energy usage, do not overload the appliance.
Page 35
OPERATION Rubber and Plastics Heat Setting • Do not dry any items made from or containing Label Directions rubber or plastics such as: - Aprons, bibs and chair covers - Curtains and tablecloths No Heat / Air - Bath mats Fiberglass •...
36 OPERATION Control Panel Control Panel Features Power On/Off Button • Press this button to turn the appliance on and press and hold it briefly to turn it off. • Pressing this button during a cycle will cancel that cycle and any load settings will be lost. Cycle Selector Knob •...
Page 37
OPERATION Time and Status Display Status Display • The display shows the settings, estimated time remaining, options, and status messages. Flow Sense Indicator • The Flow Sense duct blockage sensing system detects and alerts you to blockages in the ductwork that reduce exhaust flow from the dryer.
38 OPERATION Dry Cycles Turn the knob or press the button to select the desired cycle. When you select a dry cycle the light for the corresponding dry cycle will turn on. Cycle Guide The appliance automatically sets the dryness level and temperature at the recommended setting for each cycle.
Page 39
OPERATION Cycle Towels Description Use this cycle for drying towels. Dryness Default: Normal Available: All Temperature Default: Med. High Available: Med. High Cycle Quick Dry Description Use this cycle to quickly dry a small load of laundry. Time Default: 30 minutes Available: 10 -100 minutes Temperature Default: High...
Page 40
40 OPERATION Cycle Heavy Duty Dryness Default: Normal Available: All Temperature Default: High Available: High Cycle Air Dry Description Use this cycle to dry all items (such as plastics or rubber) that can be tumble dried without using heat. Time Default: 30 minutes Available: 10 -100 minutes Temperature...
Page 41
OPERATION Cycle Low Temp Dry Dryness Default: Normal Available: Very, More, Normal Temperature Default: Med. Low Available: Med. Low Cycle Overnight Dry Description This energy efficient cycle dries a small load overnight. Dryness Default: Normal Available: Normal Temperature Default: Med. Low Available: Med.
Page 42
42 OPERATION Cycle Rack Dry Description This cycle is used with items, such as wool sweaters, silk items, and lingerie, that should be dried flat. This cycle can also be used with items that should not be tumbled dry, such as gym shoes or stuffed animals. Install the rack in the dryer drum before using this cycle.
Page 43
OPERATION Option Cycle Damp Energy Wrinkle Control Steam Low Static Signal Saver Care Lock Steam † Sanitary Super Dry Jeans Blanket Refresh Low Temp Overnight † Easy Ironing Small Load Large Load X Large Load Wrinkle † Prevention Rack Dry †...
44 OPERATION Cycle Modifiers • Use dry level between Normal and Damp or the Damp dry level for items that you wish to iron. About Modifier Buttons Time Each cycle has default settings that are selected automatically. Customize these settings using the Use this button to manually select the drying time, cycle modifier buttons.
OPERATION Settings and Extra Functions • When this function is operating, the drum will stop to allow steam to stay in the drum. Your dryer includes several additional cycle settings to customize cycles to meet your individual needs. Energy Saver Select the desired settings after selecting the desired cycle.
Page 46
Cycle Optimization door surface can become very hot. function in the Additional Settings menu. In the LG ThinQ application, use the Product Cycle • Do not attempt to reach into the dryer during a Management feature.
Page 47
OPERATION Wi-Fi Connection Use to set up the Wi-Fi connection. When Wi-Fi is turned on, the Wi-Fi icon appears in the display. Cycle Optimization When activated, this feature organizes the cycle list and options automatically based on your usage patterns. •...
• Remote Control - Control the appliance remotely or check to see how much time is left in the cycle from the LG ThinQ application. NOTE • Once the remote control feature is enabled, you can start a cycle from the LG ThinQ application.
Page 49
Turn the knob to select On and press the wireless router manual. (OK) button to enable the remote control • LG ThinQ is not responsible for any network function. connection problems or any faults, malfunctions, or errors caused by network connection.
Page 50
• For detailed settings of the upgraded features, refer to the guide within the LG ThinQ app. FCC RF Radiation Exposure Statement...
LG ThinQ application. • Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions provided in the LG ThinQ application.
52 MAINTENANCE MAINTENANCE WARNING • Unplug the appliance before cleaning. • Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. They will damage the finish. Regular Cleaning Cleaning the Lint Filter Always clean the lint from the filter after every Cleaning the Exterior cycle.
Page 53
MAINTENANCE If the lint filter has become very dirty or clogged with fabric softener, wash the lint filter in warm, soapy water and allow it to dry thoroughly before reinstalling. NOTE • NEVER operate the appliance without the lint filter in place.
Scan this QR code to quickly access the video search page on the offical LG website. On the lg.com/us home page, click on the Support menu tab to bring up the menu selections. Select Video Tutorials. Type Dryer in the search box on the new page and click the Search button.
TROUBLESHOOTING Before Calling for Service The dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the dryer does not function properly or does not function at all, check the following before you call for service.
Page 56
56 TROUBLESHOOTING Problem Possible Cause & Solution The appliance does House fuse is blown, circuit breaker has tripped, or power outage has occurred. not heat. • Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a circuit overload, have it corrected by a qualified electrician.
Page 57
TROUBLESHOOTING Performance Problem Possible Cause & Solution Clothes are wrinkled. Clothes dried too long (overdried). • Overdrying a load of laundry can lead to wrinkled clothes. Try a shorter drying time or use a lower dry level setting and remove items while they still retain a slight amount of moisture.
Page 58
58 TROUBLESHOOTING Problem Possible Cause & Solution Clothes have damp Very large load or very small load. Single large item such as a blanket or comforter. spots after drying. • If items are too tightly packed or too sparse the sensor may have trouble reading the dryness level of the load.
Page 59
During Wi-Fi setup, the app is requesting a password to connect to the product (on certain phones). • Locate the network name which starts with "LG" under Settings > Networks. Note the last part of the network name. - If the network name looks like LGE_Appliance_XX-XX-XX, enter lge12345.
Should your LG Dryer (“Product”) fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, LG will, at its option, repair or replace the Product. This limited warranty is valid only to the original retail purchaser of the Product (“You”) and applies only when purchased lawfully and used within the United States including U.S.
Page 61
Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG Electronics USA, Inc. Attn: Legal Department- Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632.
Page 62
If you and LG are unable to resolve the dispute within 30 days, either party may proceed to file a claim for arbitration.
Page 63
LIMITED WARRANTY www.lg.com/us/support/repair-service/schedule-repair-continued and clicking on “Find My Model & Serial Number”). You may only opt out of the dispute resolution procedure in the manner described above (that is, by e-mail or telephone); no other form of notice will be effective to opt out of this dispute resolution procedure.
Page 64
LG Customer Information Center For inquiries or comments, visit www.lg.com or call: U.S.A. 1-800-243-0000 1-888-542-2623 CANADA Register your product Online! www.lg.com...