Removing Tableware; Basic Operation; Switching On The Appliance; Setting A Programme - Bosch SMP4ECC71S Information For Use

Table of Contents

Advertisement

13.3 Removing tableware
WARNING
Risk of injury!
Hot tableware can cause burns to the
skin. When hot, tableware is sensitive
to shock, may crack and can result in
injury.
When the programme has ended,
do not empty the appliance until
the tableware has cooled down for
a while.
To prevent water dripping on the
1.
tableware, unload it starting at the
bottom and working up.
Check the washing tank and ac-
2.
cessories for soiling and clean if
necessary.
→ "Cleaning and servicing",
Page 39

Basic operation

14 Basic operation
Basic operation
14.1 Switching on the appli-
ance
Press
⁠ .
The Eco 50° programme is set by
default.
The Eco 50° programme is espe-
cially environmentally friendly and
ideal for normally soiled tableware.
It is the most efficient programme
for the combination of energy/wa-
ter consumption for this type of
tableware and evidences conform-
ity with the EU Ecodesign Direct-
ive.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
14.2 Setting a programme
To adjust the washing programme to
the soiling level of the tableware, se-
lect a suitable programme.
Press the programme button re-
peatedly until the right programme
has been selected.
a The programme is set and the LED
flashes.
14.3 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
Keep pressing the button for addi-
tional functions until the appropri-
ate additional function is set.
→ "Additional functions", Page 20
a The additional function is set and
the LED flashes.
14.4 Setting timer program-
ming
You can delay the start of the pro-
gramme via the Home Connect app.
Open the Home Connect app and
select the appliance.
You can delay the start of the pro-
gramme under Operation.
14.5 Starting the programme
Press
.
a The LED on the door handle lights
up during the programme.
a The programme has ended when
no indicators on the controls light
up.
Basic operation en
33

Advertisement

Table of Contents
loading

Table of Contents