Conducting A Hotsync Operation Via A Network - Sony clie PEG-N610C Operating Instructions Manual

Advanced HotSync

Conducting a HotSync operation via a network

When you use the Network HotSync application, you can take advantage of
the LAN and WAN connectivity available in many office environments. The
Network HotSync application enables you to perform a HotSync operation
by dialing in to a network (Network Modem Sync) or by using a cradle that
is connected to any computer on your LAN or WAN (LAN Sync) (provided
that the computer connected to the cradle also has the Network HotSync
application installed, your computer is on, and the HotSync Manager is
running).
To connect to your company's dial-in server
The Network HotSync application requires the following:
• Your computer has TCP/IP support installed.
• Both your company's network system and its remote access server support
TCP/IP.
• You have a remote access account.
Everything you need to connect to your company's dial-in server (network
modem) is included in the Palm Desktop for CLIE software and your CLIE
handheld. You need to activate certain features, however, on both the Palm
Desktop for CLIE software and your CLIE handheld.
Preparing your computer
1
Click the HotSync
select Network from the shortcut menu.
2
Click the HotSync
and then select Setup from the shortcut menu.
The Setup screen is displayed.
3
Click the Network tab and make sure your user name has a
check mark next to it. If the check mark is not there, click the
check box next to your user name.
4
Click OK.
Chapter3
Exchanging and updating data using a HotSync
®
operations
icon in the Windows task tray and then
icon in the Windows task tray again
Continued on next page
®
operation
131