Panasonic PF-CX4-V Instruction Manual

Interference Prevention Filter for CX-411
PF-CX4-V, PF-CX4-H
Thank you very much for purchasing Panasonic products.
Read this Instruction Manual carefully and thoroughly for the
correct and optimum use of this product. Kindly keep this
manual in a convenient place for quick reference.
1
SPECIFICATIONS
Type
Interfelence prevention filter for CX-411
Item Model No.
PF-CX4-V
Applicable sensor model CX-411
Sensing distance with the filter
Material / Color SUS301 / Silver
2
MOUNTING AND DISMANTLING
How to mount
Insert the fixing hook of interference prevention filter into the
fixing groove of sensor.
Then, pressing the interference prevention filter against the
main unit, insert the fixing tab of interference prevention filter
into the fixing groove of sensor.
How to remove
Insert a screwdriver into the removing tab of interference
prevention filter.
Pull forward while lifting the removing tab of interference
prevention filter.
Fixing tab
Removing tab
Interference prevention filter
3 CAUTIONS
The two sets of sensors should be fitted with different types
of interference prevention filters.
The interference prevention does not work even if the filters
are fitted on emitters only, receivers only or the same model
No. of the interference prevention filters are fitted on both
the set of the sensor.
Fitted with PF-CX4-H
Receiver
Fitted with PF-CX4-V
INSTRUCTION MANUAL
MJE-PFCX4 No.0101-62V
PF-CX4-H
(thru-beam type sensor)
5m
SUS301 / Light brown
Fixing groove
Fixing groove
Fixing hook
Emitter
<Good>
<Fitted on emitters only or receivers only>
Fitted with PF-CX4-H
Receiver
Fitted with PF-CX4-V
<Fitted with the same model No. of the interference prevention filters>
Fitted with PF-CX4-V
Receiver
Fitted with PF-CX4-V
Up to 2 units can be installed closely.
Install the third unit at such a distance that it does not
interference with the first unit.
Do not install the sensor having the interference prevention
filter at a tilt.
It can affect the sensing range or the interference range.
Install two sets parallel to each other.
<Good>
Avoid use in places having excessive dust, vapor, etc., or in
places where it may come in direct contact with water, oil.
Also, avoid long-term preservation and continuous use at
high temperature or humidity, since it can affect the sensing
characteristics.
Panasonic Industry Co., Ltd.
1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan
https://industry.panasonic.com/
Please visit our website for inquiries and about our sales network.
Panasonic Industry Co., Ltd. 2024
April, 2024
Emitter
<Not good>
Emitter
<Not good>
Install apart
<Not good>
PRINTED IN JAPAN