If the power cord is damaged, you must have it replaced by • Philips, a service center authorized by Philips, or similarly qualified persons in order to avoid a hazard. Do not use the appliance if the plug, the power cord, or the •...
Page 4
Do not place the appliance directly below an air conditioner to • prevent condensation from dripping onto the appliance. Only use the original Philips filters specially intended for this • appliance. Do not use any other filters. Combustion of the filter may cause irreversible human hazard •...
Correct disposal helps prevent negative consequences for the environment and human health. Simplified EU declaration of conformity Hereby, DAP B.V. declares that the radio equipment type AC1715 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www�philips�com�...
2 Your air purifier Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www�philips�com/welcome� Product overview Air outlet Control panel Particle sensor NanoProtect filter (FY1700/30) Back cover Plug adaptor*...
3 Getting started Installing the filter Remove all packaging of the filter before first use. Note: Make sure the air purifier is unplugged from the electrical outlet before installing the filter. Pull the back cover and remove it from the appliance. Pull the filter from the appliance. Remove all packaging materials of the air purification filter.
• First, the power socket on the appliance. • Then, the wall outlet. Wi-Fi connection Setting up the Wi-Fi connection for the first time Download and install the Philips “Air+” app from the App Store or Google Play� Put the plug of the air purifier in the power socket and touch turn on the air purifier.
Follow the steps 3-4 in “Setting up the Wi-Fi connection for the first time” section. 4 Using the air purifier Understanding the air quality light The air quality light automatically goes Air quality light color Air quality level on when the air purifier is switched on, and lights up all colors in sequence. Blue Good After approximately 30 seconds, the...
For optimum purification performance, close doors and windows. • Keep curtains away from the air inlet or air outlet. • Put the plug of the air purifier in the power socket. Touch to switch on the air purifier. » The air purifier beeps. »...
Sleep mode ( ): The air purifier Turbo mode ( ): The air purifier operates quietly at a low speed. After operates on the highest speed. 3 seconds, the screen lights off. Switching the display indicator Note: The appliance displays PM2.5 level by default. Touch and hold button for 3 seconds to switch display indicator among IAI / •...
ambient light is dark. You can touch any button to wake up all lights. Then, if no further operation, all lights will be off or dim again to match with the ambient light. You can touch the button manually to turn off all lights and the control panel. Touch any button to wake up all lights.
Cleaning the particle sensor Clean the particle sensor every 2 months for optimal functioning of the appliance. Note: If the air purifier is used in a dusty environment, it may need to be cleaned more • often� If the humidity level in the room is very high, condensation may develop on the •...
Pull the back cover and remove it from the appliance. Pull the filter from the appliance. Clean the surface of the filter with a vacuum cleaner. Put the filter back into the appliance. Reattach the back cover. Put the plug of the air purifier in the power socket. Touch the button to switch on the appliance.
Switch off the air purifier and unplug from the power socket. Pull the back cover and remove it from the appliance. Pull the filter from the appliance. Remove all packaging materials of the new filter. Put the new filter into the appliance. Reattach the back cover.
Put the power plug in the power socket. Within 15 seconds after power on, touch and hold button for 3 seconds to reset the filter lifetime counter. 6 Storage Turn off the air purifier and unplug from the power socket. Clean the air purifier, particle sensor and the surface of the filter (see chapter “Cleaning and maintenance”).
Page 18
This is normal. However, if the appliance smell. produces a burnt smell even if removing filters, contact your Philips dealer or an authorized Philips service center. The filter may produce smell after being used for a while because of the absorption of indoor gases. It’s recommended that you reactivate the filter by putting it in direct sunlight for repeated use.
Page 19
Problem Possible solution The appliance still Perhaps you did not reset the filter lifetime counter. Switch • indicates that I on the appliance. Then touch and hold the need to replace a 3 seconds. filter, but I already did. Error code “E1” The motor has malfunctions.
Order parts or accessories If you have to replace a part or want to purchase an additional part, go to your Philips dealer or visit www�philips�com/support� If you have problems obtaining the parts, please contact the Philips Consumer Care Center in your country.
Page 21
PHILIPS and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N�V� and are used under license� This product has been manufactured by and is sold under the responsibility of Versuni Holding B�V�, and Versuni Holding B�V� is the warrantor in relation to this product�...